DM-408-B-4-I 480-8" 4-bolt Trailer
480-8" 4-BOLT TRAILER TIRES/RIMS-MATDM408B4I >
Recently Viewed
480-8" 4-BOLT TRAILER TIRES/RIMS-MATDM408B4I >
10-MM X 50-MM CUP POINT SET SCREWS-MET91610050 >
1-3/32" STEEL MINI-GATOR CLIPS
2-1/2" LIQUID FILLED GAUGE BKMT 10000#-LFG10000LBACK>
DRILLCO 215N060A 2150N Spiral Point Tap, Right Hand Cutting, M6x1 Thread, D5 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, M35 HSS-Co
Nitro-Max ANSI/ANSI taps are produced with a reduced neck to allow for longer reach, improved coolant flow, and easier chip evacuation. These taps offer higher heat resistance and red hardness over conventional High Speed Steel taps. For CNC applications.
Justrite® 08300 Horizontal Drum Vent, 2 in NPT/NPS Bung, For Use With 205 L Petroleum Based Solvent Drums, Brass, Brass
Automatic pressure relief ensures safe workplace. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa). Vents are tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds. Keep the vent in closed position to prevent flammable vapor from escaping. A built-in flame arrester helps absorb and dissipate heat for added safety. Vacuum relief is automatic on vertically installed vents and manual on horizontally installed vents. Drum vents are FM Approved. For protection and avoidance of high-pressure drum failure while dispelling heat using its flame arrestor.
