National Hardware® N830-224 N830 512 Door Hinge, Cold Rolled Steel, Satin Brass
National Hardware® N830-224 N830 512 Door Hinge, Cold Rolled Steel, Satin Brass
-
BrandNational Hardware®
-
UPC886780009644
-
Manufacturer Part NumberN830-224
-
CountryUSA
-
FinishSatin Brass
-
MaterialCold Rolled Steel
-
Corner TypeRound
-
SeriesN830 512
-
Holes per Leaf3
-
Overall Width3-1/2 in
- Heavy gauge cold rolled steel for added strength
- Flush pin for finished appearance
- Five knuckle, full mortise design
- 5/8 in radius round corners
- Removable pin for easier installation
- Screw holes are countersunk
-
Alternative Part NumberS083-575
-
UNSPSC31162403
-
Package Description1/PK
Recently Viewed
National Hardware® N830-224 N830 512 Door Hinge, Cold Rolled Steel, Satin Brass
Justrite® 08207 Large Drum Funnel, Galvanized, For Use With 2 in Drum Bung and Flammables, 3/4 in NPT, Steel
Prevent spills when transferring flammable solvents, thinners, oils or paint wastes Wide-mouth opening with hinged, stay-open lid. Built-in flame arrester prevents fire intrusion. Self-closing lid in case of fire. Galvanized steel with durable exterior epoxy powder-coat finish. Safely transfer flammable liquids into a 30- or 55-gallon (110- or 200-L) drum using this 2.6-gallon (9.8-L) capacity safety funnel that fits into a 2-in (51-mm) bung. Wide 10-3/4-in (273-mm) mouth handles rapid pouring without spills. A built-in brass flame arrester absorbs and dissipates heat preventing any external ignition source from reaching the drum’s content. Self-closing cover with a fusible link, that melts at 165°F (74°C), automatically shuts in case of a fire. Heavy-duty 18-gauge (1-mm thick) galvanized steel construction with electrostatically applied epoxy powder-coat offers excellent durability and chemical resistance. Lid in closed position reduces vapors and accepts a lock (not included) to prevent unauthorized access. FM-Approved. EPA and OSHA compliant. For the secure transfer of flammable or non-flammable liquids into drums for manufacturing, chemical, oil, gas, and other industries.
1/4" GR-80 ALLOY LOG CHAIN >(FT)-TCI18067 >
Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.
3/8" X 6" EYE/EYE TURNBUCKLE-NTL177394 >
NYLON TUBING TUBE O.D - 3/16" TUBE I.D - 138" WALL THICKNESS - .025" WP AT 75-DEGREES-F-225-PSI COLOR - NATURAL (FT)
