Crosby® 1032616 HG-228-5/8 x 6 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 6 in Take Up, 15.82 in L Close, Steel
Crosby® 1032616 HG-228 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 6 in Take Up, 15.82 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1032616
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter5/8 in
-
MaterialSteel
-
Closed Length15.82 in
-
SeriesHG-228
-
Working Load3500 lb
-
End/EndJaw/Jaw
-
Take Up6 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Forged jaw ends are fitted with bolts and nuts for 1/4 in through 5/8 in and pins and cotters on 3/4 in through 2-3/4 in sizes
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 7|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1032616 HG-228-5/8 x 6 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 6 in Take Up, 15.82 in L Close, Steel
Crosby® 1032616 HG-228 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 6 in Take Up, 15.82 in L Close, Steel
Morse® 397568 Heavy Duty Reciprocating Saw Blade, 4 in L x 1/2 in W, 32, Bi-Metal Body
Morse RBA432T05 (397568) 4", 32 tooth bimetal airsaw blade are specifically designed for use with pnewmatic saws. Used for thin sheet metal applications Primarily used for autobody and trailor modifications. Standard 1/2" wide blade with tapered point between body panels and under stripped/rusted fasteners. Five (5) blades per package.
Weiler® 00204 TLN-3 Narrow Face Wheel Brush, 3 in Dia Brush, 7/16 in W Face, 0.006 in Dia Filament/Wire Crimped Filament/Wire, 3/8 to 1/2 in Arbor Hole
Weiler® 00204 TLN-3 Narrow Face Wheel Brush, 3 in Dia Brush, 7/16 in W Face, 0.006 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 3/8 in Arbor Hole
MORSE® 43420 1896 Center Cutting Double End Regular Length End Mill, 3/8 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
MORSE® 43420 1896 Center Cutting Double End Regular Length End Mill, 3/8 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
Milwaukee® 4096 Diamond Coring Motor With Clutch, 450 to 900 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will handle core bits from 2 in. to 10 in. in diameter.
SAFETY CHAINS-REDSC31648 >
