Crosby® 1030636 HG-225-1/4 X 4 Turnbuckle, Hook/Eye, 1/4 in Thread, 400 lb Working, 4 in Take Up, 8.29 in L Close, Steel
Crosby® 1030636 HG-225 Turnbuckle, Hook/Eye, 1/4 in Thread, 400 lb Working, 4 in Take Up, 8.29 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1030636
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter1/4 in
-
MaterialSteel
-
Closed Length8.29 in
-
SeriesHG-225
-
Working Load400 lb
-
End/EndHook/Eye
-
Take Up4 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
- For turnbuckles size 1/4 in through 1 in, a shackle one size smaller can be reeved through eye
- Turnbuckle hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 6|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1030636 HG-225-1/4 X 4 Turnbuckle, Hook/Eye, 1/4 in Thread, 400 lb Working, 4 in Take Up, 8.29 in L Close, Steel
Crosby® 1030636 HG-225 Turnbuckle, Hook/Eye, 1/4 in Thread, 400 lb Working, 4 in Take Up, 8.29 in L Close, Steel
MORSE® 44380 4580 Center Cutting Regular Length Single End End Mill, 3/8 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-5/16 in OAL, Bright
MORSE® 44380 4580 Center Cutting Regular Length Single End End Mill, 3/8 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-5/16 in OAL, Bright
V-BELTOUTSIDE CIRCUMFERENCE >319"-JASC315 >
Gates® Power Transmission Super HC® 8V1700 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 170 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
MORSE® 32481 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-8 Thread, H6 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE® 32481 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-8 Thread, H6 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
OIL SEALS-1.375" X 2.250" X .250"-CHI13698>
