Campbell® T7615602 Round Swiveling Eye Spring Snap, 1/4 in, 2 in OAL, 1/4 in ID Eye, 20 lb Load, Nickel Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418191824
-
Manufacturer Part NumberT7615602
-
CountryUSA|Canada
-
Load Capacity20 lb
-
FinishNickel Plated
-
MaterialDie Cast Zinc
-
TypeRound Swiveling
-
Size1/4 in
-
Snap Opening7/32 in
-
Overall Length2 in
-
Eye Inside Diameter1/4 in
- Do not exceed the working load limit
- Do not use for overhead lifting or hoisting
| Cross-Reference Number |
|---|
| 703545 |
-
UNSPSC24101613
-
Package DescriptionEACH
-
WarrantyLifetime Limited
-
Catalog
Recently Viewed
Campbell® T7615602 Round Swiveling Eye Spring Snap, 1/4 in, 2 in OAL, 1/4 in ID Eye, 20 lb Load, Nickel Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
AIR FILTER
2-1/2" SCH-80 CPVC 45-D SXS ELBOW-NIB1817025 >
Inner Diameter (Bore): 150 mm Outer Diameter: 225 mm Width: 56 mm Bore Type: Tapered (K = taper 1:12) Design Features: Self-aligning, accommodates heavy radial and axial loads in both directions, typically includes an annular lubrication groove with three holes in the outer ring (W33 variant).
#2040 BULK #12 ZINC CEILING HOOKS-NTL120642 >
Browning® 1225044 Minimum Plain Bore Type C1 Change Gear, 8 Diametral Pitch, 14.5 deg Pressure Angle, 1-1/4 in W Face, 20 Teeth, 2-1/2 in Dia Pitch, 1-3/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
