Campbell® T7620534 Rigid Round Eye Quick Snap, 3/4 in, 3-15/64 in OAL, 3/4 in ID Eye, 140 lb Load, Polished
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418201202
-
Manufacturer Part NumberT7620534
-
CountryUSA|Canada
-
Load Capacity140 lb
-
FinishPolished
-
MaterialSolid Bronze
-
TypeRigid Round
-
Size3/4 in
-
Snap Opening9/16 in
-
Overall Length3-15/64 in
-
Eye Inside Diameter3/4 in
- Do not exceed the working load limit
- Do not use for overhead lifting or hoisting
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 24G060 |
-
UNSPSC24101613
-
Package DescriptionEACH
-
WarrantyLifetime Limited
-
Catalog
Recently Viewed
Campbell® T7620534 Rigid Round Eye Quick Snap, 3/4 in, 3-15/64 in OAL, 3/4 in ID Eye, 140 lb Load, Polished
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE >52-JASBX49 >
Browning 15-TOOTH #60-1 CHAIN SPROCKETS BRW H-6015 X 1-3/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
4"-WHEEL X 1/2"-USS 115-LB STEM CASTER - JWH243590 >
The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3" and the 50-75mm rods). Rod diameters are approximately 1/4" (6mm) on the A and B sizes, and approximately 11/32" (8.5mm) on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 8-32" Range, .001" Grad, 4 Measuring Rods with Case.
POCKET KNIFE-RGL75202 >
