Master Locks #3-LF KEYED ALIKE # 3212 PADLOCKS MAS 3-LF-KA-3212
#3-LF KEYED ALIKE #3212 PADLOCK - MAS3LFKA3212>
Recently Viewed
#3-LF KEYED ALIKE #3212 PADLOCK - MAS3LFKA3212>
2-GANG CLEAR OUTDOOR ELECTRICAL COVER - JWH534315 >
3/4" X 3/4" X 1/8" X 72 ALUMINUM ANGLES-M-D58248 >
RIDGID® 39645 Selector Knob, For Use With: Model 141 2-1/2, 3, 3-1/2, 4 in Pipe and Conduit Geared Threader and Model 161 4, 4-1/2, 5, 6 in Pipe and Conduit Geared Threader
RIDGID® 39645 Selector Knob, For Use With: Model 141 2-1/2, 3, 3-1/2, 4 in Pipe and Conduit Geared Threader and Model 161 4, 4-1/2, 5, 6 in Pipe and Conduit Geared Threader
Browning® 1296441 T45L Automatic Torque Limiter, 1-1/8 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
5/8" X 3/8" BRASS COMPRESSION UNION-JWH441295>
