262717 DO-IT-BEST/HWI PRODUCTS
25 FOOT TOP QUALITY GRAY SCREEN SPLINE FOR ALUMINUM AND FIBERGLASS SCREEN.-JWH262717 >
Recently Viewed
25 FOOT TOP QUALITY GRAY SCREEN SPLINE FOR ALUMINUM AND FIBERGLASS SCREEN.-JWH262717 >
Dichtomatik 67023545 O-Ring, 29.4 mm ID x 35.6 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom G-30
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
:Flat Type; Stamped Aluminum Material; 4.56 Inch Width X 4.56 Inch Height Size; Powder Coated Finish; Gray Color; 2 Gang(S); UL 514D, CUL, CSA C22.2 Approval; Box Mounting; Universal Mounting Position; Blank Device Opening
Crosby® 1016935 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Crosby® 1016935 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Littelfuse® POWR-GARD® LLSRK060ID Current Limiting Time Delay Fuse, 60 A, 600 V AC/300 V DC, 200/20 kA Interrupt, RK1 Class, Cartridge Body
The all new LLSRK_ID series fuse is the most advanced Class RK1 fuse available today providing unparalleled performance and protection to modern circuits. The patented Indicator™ technology provides instant identification of a blown fuse greatly enhancing system up time, while the precision formed short circuit elements virtually eliminate damage to components from unexpected electrical faults. In addition, the all new solid state overload section has no moving parts, stopping unnecessary fatigue failures commonly found in other spring loaded fuses.
IDC Select® IDC F-1-3/4 Finished Bore QD® Bushing, 1-3/4 in Dia Bore, 4.437 in Dia Barrel, 6-5/8 in Dia Flange, 3-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
