Joist Hangers
Simpson Strong-Tie® LUS28 Double-Shear Face-Mount Joist Hanger, 2 x 8 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS26 Double-Shear Face-Mount Joist Hanger, 2 x 6 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS24 Double-Shear Face-Mount Joist Hanger, 2 x 4 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS210 Double-Shear Face-Mount Joist Hanger, 2 x 10 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LRU26Z Face-Mount Rafter Hanger, 2 x 6 in Joist, 18 ga, Steel, ZMAX® Galvanized
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
Recently Viewed
7-MM 12-PT 3/8"-DRIVE DEEP SOCKETS
8-MM 6-PT 3/8"-DR SOCKETS
Drive Size: 1-1/2" square drive Socket Size: 3-7/8" output Configuration: 6-point single hex Overall Length: 5.370 inches Wrench Depth: 2.510 inches Bolt Clearance: 2.750 inches Weight: 14.77 lbs.
12-MM 12-PT 1/2"-DR SOCKET - ALL12312 >
RIDGID® 38695 Compression Spring, For Use With: Model 2-S 1/8 to 2 in Reamers and Model 111-R/12-R Exposed Ratchet Threader
RIDGID® 38695 Compression Spring, For Use With: Model 2-S 1/8 to 2 in Reamers and Model 111-R/12-R Exposed Ratchet Threader
6-MM SOLID SHAFT NUTDRIVER - ALL30856 >
