Cable to Channel Clamps

Minimum Number of Clips: A minimum of 3 clips must be applied to securely form a wire rope eye or termination loop. Torque Requirement: The nuts must be tightened evenly to a minimum torque of 95 ft-lbs to prevent cable slippage .Rope Turn-Back: You must allow for exactly 12 inches of cable turn-back from the base of the eye to ensure adequate length for clip placement. Efficiency Rating: Properly installed clips on 9/16" wire rope yield an 80% efficiency rating based on the catalog breaking strength of the wire rope.

The Crosby G-450 7/8" is a heavy-duty, drop-forged wire rope clip (part number 1010211) designed by The Crosby Group to clamp and secure 7/8-inch diameter wire ropes. It features a hot-dip galvanized coating to prevent rusting and is instantly recognizable on jobsites by its signature Red U-Bolt.

Brand: Crosby Material Handling Group Model Family: G-450 series (Standard wire rope clips) Size: 7/16 inch Industry Part Number: 1010113

The Crosby G-450 5/8" Wire Rope Clip (often written as Crosby G450 5/8) is a premium, hot-dip galvanized drop-forged steel clamp designed to create secure, load-bearing loops or end terminations in wire rope assemblies. It is easily recognized by its signature Red-U-Bolt® design

The Crosby G-450 5/16" is a heavy-duty, drop-forged steel wire rope clip used primarily for creating loop terminations or securing wire rope ends in rigging applications. Identifiable by its iconic signature Red U-Bolt, this industry-standard clamp provides high strength and reliability for lifting, winching, and guy lines.

The Crosby G-450 3/8" Drop Forged Wire Rope Clip (Manufacturer Part Number: 1010097) is a heavy-duty rigging fastener designed to form loop terminations or secure two wire ropes together. Characterized by its signature Red U-Bolt, this structural hardware is hot-dip galvanized to maximize resistance against rust and outdoor corrosion.

The Crosby G-450 3/4" (Part Number 1010195) is a premium, hot-dip galvanized drop-forged steel wire rope clip designed to secure 3/4-inch cable terminations and loop formations. It is instantly recognizable by its signature Red U-Bolt design, which serves as Crosby's assurance of high-quality rigging standards

The Crosby G-450 3/16" (Manufacturer Part Number 1010033) is a hot-dip galvanized, drop-forged steel wire rope clip featuring the brand's signature Red-U-Bolt® design, engineered to create secure end terminations or loop eyes for 3/16-inch diameter cables. When applied correctly, these industrial-grade clips are widely trusted in material handling, rigging, and construction industries.

The Crosby G-450 1/8" (Manufacturer Part Number 1010015) is a heavy-duty, hot-dip galvanized drop-forged steel wire rope clip. It is used to create secure, load-bearing wire rope loop terminations or eyes for rigging and lifting applications.

The Crosby G-450 1/4" (Part Number 1010051) is a premium, hot-dip galvanized drop-forged steel wire rope clip featuring the brand's iconic signature Red U-Bolt®. It is specifically engineered to form secure, load-bearing eyes or loops and complete terminal connections on 1/4-inch diameter wire ropes.

Drop forged, galvanized wire rope clips provide strength and support for the most heavy- duty rigging jobs. Our domestic clips from Crosby® feature the distinctive Red-U-Bolt®, for quick visual identification and the assurance of genuine Crosby® made in the USA quality.

Wire rope clips are most commonly used with wire rope assemblies, with two or three clips generally required to properly secure the wire rope's ends. It's important to note that wire rope clips are not intended for use in overhead lifting applications.

The G-450 series from Crosby® features a traditional style U-bolt and saddle secured with nuts, with the entire clip galvanized to resist rust and corrosion. Sizes 1/8" through 2-1/2" and 3" have a forged base. They offer an efficiency rating of 80% for 1/8''through 7/8'' sizes, and 90% for sizes 1" through 3-1/2" (based on the catalog breaking strength of wire rope used). Clip sizes up through 1-1/2" have rolled threads.

This is a heavy-duty clip used for 1-5/8 inch diameter wire ropes. It requires a minimum of 8 clips per termination.

You said: Crosby g45011/8The model number Crosby G-450 represents the industry-standard galvanized drop-forged wire rope clip (cable clamp) manufactured by Kito Crosby. Depending on whether your measurement query specifies a 1/8-inch or a 1--1/8-inch cable diameter, the specifications diverge significantly

The Crosby G-450 is an industry-standard, hot-dip galvanized drop-forged wire rope clip featuring the signature Red U-Bolt® design. Depending on the specific variation you are referring to, here is the breakdown for both the 1/4" and 1-1/4" model options:

The Crosby G-450 series refers to industry-standard, drop-forged galvanized wire rope clips distinguished by their signature Red U-Bolt®. Depending on whether you mean the 1-1/2" size (Crosby Stock #1010319) or the 1/2" size (Crosby Stock #1010131), the specific requirements for terminations vary significantly.

Entire clip is galvanized to resist corrosive and rusting action
Achieves 80% efficiency of published wire rope breaking strength
Bolts are an integral part of the saddle
Saddle is made from forged steel
Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation
Assembled with standard heavy hex nuts
Satisfies ASME B30.26 requirements

Fist Grip® wire rope clips from Crosby® differ from traditional wire rope clips, with bolts and heavy hex nuts comprising the design. This allows for the nuts to be installed in a way that lets the operator swing the wrench in a full arc for quick install. Saddles are forged steel, with the entire clip galvanized for corrosion resistance.

Provides an efficiency rating of 80% for sizes 3/16" - 7/8", and 90% for sizes 1" - 1-1/2". All sizes meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. All sizes also meet additional critical performance requirements including fatigue life, impact properties and material traceability, not address by ASME B30.26.

Fist Grip® wire rope clips from Crosby® differ from traditional wire rope clips, with bolts and heavy hex nuts comprising the design. This allows for the nuts to be installed in a way that lets the operator swing the wrench in a full arc for quick install. Saddles are forged steel, with the entire clip galvanized for corrosion resistance.

Provides an efficiency rating of 80% for sizes 3/16" - 7/8", and 90% for sizes 1" - 1-1/2". All sizes meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. All sizes also meet additional critical performance requirements including fatigue life, impact properties and material traceability, not address by ASME B30.26.

he Crosby G-429 1/2" refers to the 1/2-inch Galvanized Fist Grip® Wire Rope Clip manufactured by Kito Crosby. Unlike traditional U-bolt style clips, this heavy-duty dual-saddle clamp features integral bolts and nuts that allow for rapid installation and eliminate the risk of installing the clip upside down

A heavy-duty, hot-dip galvanized Fist Grip® wire rope clip.

B-Line has long been a leading manufacturer of support systems and electrical enclosures for the mechanical, electrical and telecommunications industries. Our Spring Steel Fastener line includes a wide range of quality fastening systems for electrical, mechanical and telecommunication applications. Our Spring Steel Fasteners include products for attachment to metal studs, steel beams, acoustical tee, drywall, purlins, and channel.

B-Line has long been a leading manufacturer of support systems and electrical enclosures for the mechanical, electrical and telecommunications industries. Our Spring Steel Fastener line includes a wide range of quality fastening systems for electrical, mechanical and telecommunication applications. Our Spring Steel Fasteners include products for attachment to metal studs, steel beams, acoustical tee, drywall, purlins, and channel.

EATON B-LINE CONDUIT/PIPE CLAMP, 2-PIECE, SERIES: B-2000, 1/2" CONDUIT, 16 GA TICHKNESS, CHANNEL MOUNTING, FOR USE WITH" PVC COATED RIGID CONDUIT/CLAMP, STEEL, ZINC PLATED

1/16" WIRE ROPE CLAMPS, GALVANIZED STEEL-DIX86980 >