Sioux Chief 524-50PK3 Metal Hanger Strap, Alternating 1/4 and 3/16 in Hole, 50 ft L x 3/4 in W, Galvanized
Sioux Chief metal hanger strap shall be used where necessary to support CTS, IPS or DWV pipe. Metal strap shall be made with galvanized or copper-plated steel and installed in accordance with national codes pertaining to hanger spacing and slope requirements. Metal hanger strap shall feature 1/4 or 3/16 in pre-drilled pilot holes in alternating pattern and strap shall be 3/4 in wide.
-
BrandSioux Chief
-
UPC739236203069
-
Manufacturer Part Number524-50PK3
-
CountryUSA|Canada
-
FinishGalvanized
-
MaterialSteel
-
Gauge24 ga
-
Width3/4 in
-
Hole DiameterAlternating 1/4 and 3/16 in
-
Series524
-
Length50 ft
- Wear gloves and eye protection
- Available in galvanized or copper-plated steel
-
UNSPSC31162310
-
Package DescriptionCOIL
-
Specification Sheet
Recently Viewed
Sioux Chief 524-50PK3 Metal Hanger Strap, Alternating 1/4 and 3/16 in Hole, 50 ft L x 3/4 in W, Galvanized
Sioux Chief metal hanger strap shall be used where necessary to support CTS, IPS or DWV pipe. Metal strap shall be made with galvanized or copper-plated steel and installed in accordance with national codes pertaining to hanger spacing and slope requirements. Metal hanger strap shall feature 1/4 or 3/16 in pre-drilled pilot holes in alternating pattern and strap shall be 3/4 in wide.
The DeWALT® 8 lb EXOCORE™ sledge hammer is part of the full line of long and short handle sledges that have carbon fiber composite overstrike to protect the weakest part of the tool where most long handle tools commonly break. These sledge hammers have a concentrated strike face that achieves a clean and effective break.
Morse® markets roller chain featuring greater resistance and increased endurance limit. Morse® shot peens its rollers to create a favorable state of compression residual stress on the surface. This process eliminates surface cracks and blemishes. The chain offered meets the standards required in the marketplace for many applications. Roller chain is available from 1/4 in pitch to 2-1/2 in pitch. Morse® offers standard roller chain in multiple widths to 8 strands up to 2 in pitch. Roller chain accessories such as connecting links are available in slip fit on the pins. This allows for easy assembly . They are also furnished with spring clip or cotter keys, depending on pitch. For heavy applications, we offer an optional connecting link. It has a removable plate with a light press fit on the pins. Regular offset links are used when a chain contains an odd number of links.
3/8" X 8" STANDARD TIP SQUARE SHANK SCREWDRIVER
Loctite® 135393 290™ Low Viscosity Medium High Strength Wicking Grade Threadlocker, 250 mL Bottle, Liquid Form, Green
LOCTITE® 290 is a liquid medium/high-strength thread locker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.
Eklind® 60614 Power-T™ Key Set With Stand, 11 Pieces, 5/64 to 3/8 in Hex, T-Handle Grip Handle, Alloy Steel, Black Oxide
Eklind® 60614 Power-T™ Key Set With Stand, 11 Pieces, 5/64 to 3/8 in Hex, Slip-Resistant Grip/T-Handle Handle, Alloy Steel, Black Oxide
