Proto® J3100A Angled Head Open End Wrench Set, 7 Pieces, 3/8 to 3/4 in, Full Polished
Proto® J3100A Angled Head Open End Wrench Set, 7 Pieces, 3/8 to 3/4 in, Full Polished
-
BrandProto®
-
UPC662679051983
-
Manufacturer Part NumberJ3100A
-
CountryUSA
-
FinishFull Polished
-
TypeAngled Head
-
Number of Pieces7
-
Size Range3/8 to 3/4 in
-
Specifications15 and 60 deg Head
-
System of MeasurementImperial
- Full polish finish provides corrosion resistance and easy-to-clean surfaces
- 15 deg and 60 deg angle heads allow wrench to be used in four different turning angles for greater access in tight work areas
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1Q405 |
| Grainger | 1Q405 |
-
UNSPSC27111706
-
IncludesJ3112 3/8 in, J3114 7/16 in, J3116 1/2 in, J3118 9/16 in, J3120 5/8 in, J3122 11/16 in, J3124 3/4 in Wrenches and J25TR07C Tool Roll
-
Standards/ApprovalsASME B107.100
-
Catalog
Recently Viewed
Proto® J3100A Angled Head Open End Wrench Set, 7 Pieces, 3/8 to 3/4 in, Full Polished
Proto® J3100A Angled Head Open End Wrench Set, 7 Pieces, 3/8 to 3/4 in, Full Polished
Browning® 1127745 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Hardened Teeth and Keyway, 1 in Dia Bore, 2.11 in OD, #35 Chain, 16 Teeth, 3/8 in Pitch, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Dodge® 22728 D-Flex Finished Bore Flexible Type J Sleeve Coupling Flange, 06 Coupling, 1-1/4 in Dia Bore, 1-7/32 in L Through Bore, 1.94 in Dia Hub, Sintered Steel
Apollo™ 7150101 71-500 2-Piece Ball Valve, 1/4 in Nominal, FNPT End Style, Bronze Body, Standard Port, MPTFE Softgoods, Domestic
Apollo™ 7150101 71-500 2-Piece Ball Valve, 1/4 in Nominal, FNPT End Style, Bronze Body, Standard Port, MPTFE Softgoods, Domestic
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
MORSE® 20208 773 Screw Extractor, #8 Extractor, 3/4 to 1-1/32 in Drill, For Screw Size: 1-3/8 to 1-3/4 in, 4-3/8 in OAL
MORSE® 20208 773 Screw Extractor, #8 Extractor, 3/4 to 1-1/32 in Drill, For Screw Size: 1-3/8 to 1-3/4 in, 4-3/8 in OAL
