Proto Tools 8-PC 3/8"-DR C/FOOT/FLARE NUT PRO J-4900-FL
Proto® J4900FL Crowfoot Wrench Set, 8 Pieces, 5/8 to 1-1/16 in, Full Polished
-
BrandProto®
-
UPC662679163426
-
Manufacturer Part NumberJ4900FL
-
CountryUSA|Canada
-
FinishFull Polished
-
MaterialAlloy Steel
-
Number of Pieces8
-
Size Range5/8 to 1-1/16 in
-
Specifications3/8 in Drive, Flare Nut, Box End Drive
-
Suitable For Use With4, 6 and 12 Point Fastener
-
System of MeasurementImperial
- Special heat treated alloy steel helps increase strength and durability
- 12 point box end allows for fine indexing, helping to improve speed and access
- Full polish finish provides corrosion resistance and easy-to-clean surfaces
- Locking hole helps hold crowfoot in place during use
- Use with a locking extension to help prevent tool loss in awkward locations
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 83130856 |
| MSC | 83130856 |
| MSC | 83130856 |
-
UNSPSC27111753
-
Standards/ApprovalsASME B107.21
-
WarrantyLifetime
-
Catalog
Recently Viewed
Proto® J4900FL Crowfoot Wrench Set, 8 Pieces, 5/8 to 1-1/16 in, Full Polished
Bore Diameter (d): 30 mm Outside Diameter (D): 72 mm Overall Width (B): 30.2 mm Contact Angle: 30° to 32°Enclosure Type: Open (no integrated rubber seals or shields) Dynamic Radial Load Capacity (C): 41.5 kN Static Radial Load Capacity (C₀): 27.5 kN Limiting Speed: Up to 9,000 RPM Total Weight: Approximately 0.53 kg (1.18 lbs)
MAXLOAD DOUBLE ROW BALL BEARING-NTNW5206LLU >
MORSE® 11382 1330 General Purpose Jobber Length Drill Bit, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11382 1330 General Purpose Jobber Length Drill Bit, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62022RSNR >
HCI Preferred Supplier 944431 Lift In-Line Check Valve, 3/4 in Nominal, NPT End Style, Forged Brass Body
HCI Preferred Supplier 944431 Lift In-Line Check Valve, 3/4 in Nominal, NPT End Style, Forged Brass Body
