RIDGID® 31565 Coil and Flat Spring Assembly, For Use With 6 in Straight Pipe Wrench
RIDGID® 31565 Coil and Flat Spring Assembly, For Use With 6 in Straight Pipe Wrench
-
BrandRIDGID®
-
UPC095691315656
-
Manufacturer Part Number31565
-
CountryUSA
-
Suitable For Use With6 in Straight Pipe Wrench
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyLifetime
-
Warranty Information
Recently Viewed
RIDGID® 31565 Coil and Flat Spring Assembly, For Use With 6 in Straight Pipe Wrench
RIDGID® 31565 Coil and Flat Spring Assembly, For Use With 6 in Straight Pipe Wrench
Proto® JHD050M Super Heavy Duty Slugging Wrench, 50 mm Box End Wrench, Federal GGG-W-636E, 12 Points, 32 mm THK Box End, 273 mm OAL, Black Oxide
PTI 10B-31B Single Strand Hub Type B Roller Chain Sprocket, 20 mm Dia Bore, 163.9 mm OD, #10B-1 Chain, 31 Teeth, 15.875 mm Pitch, C45 Steel
Hub type metric sprockets are available with a minimum plain bore (pilot bore) and some stock finished bore sizes. Any shaft size is possible with our custom bore and keyway capability. Sprockets with hubs are typically fitted to the shaft as a clearance fit. They are held in place with two set screws and a keyway. Clearance fits are popular for light loads and slow speeds. A press fit (or shrink fit to the shaft) is usually preferred for higher speeds or heavier loads as they fit to the shaft more securely than a clearance fit sprocket. Depending on the clearance of the shaft fit, sprockets may work slightly on the shaft causing possible fretting or shaft wear. All sprockets are available with hardened teeth from stock or on request. Press fits usually require the sprocket to be heated for installation to expand the bore. As a heated sprocket cools, it shrinks, conforming to the shaft with a tight grip. A set screw can be used to secure the key. The TL taper bushed sprocket will function like the press fit sprocket and is generally easier to install.
Browning® 1112093 Double Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 to 2-3/8 in Dia Bore, 4.52 in OD, 50 Chain, 21 Teeth, 5/8 in Pitch, Steel
Browning® offers type A plate steel sprockets in single strands. Offerings include 25 to 200 pitch range.
Proto® JUSN366 Super Heavy Duty Slugging Wrench, 4-1/8 in Box End Wrench, Federal GGG-W-636E, 12 Points, 2-7/8 in THK Box End, 18 in OAL, Black Oxide
9" MAGNETIC TORPEDO LEVELS-PDTKP753319 >
