Proto Tools 3/8"-DR RATCHETING TORQUE WRENCH PRO J-6005-C
Proto® J6005C C Micrometer Torque Wrench, 3/8 in Drive, Fixed Head, 16 to 80 ft-lb, 0.5 ft-lb, 15 in OAL
-
BrandProto®
-
UPC662679135928
-
Manufacturer Part NumberJ6005C
-
CountryUSA|Canada
-
FinishFull Polished
-
MaterialSteel
-
Torque Range16 to 80 ft-lb
-
Minimum Number of Cycles50000
-
Graduations0.5 ft-lb
-
Accuracy+/-3% CW, +/-6% CCW
-
Rotation TypeCW/CCW
-
Handle TypeKnurled/Screw-On End Cap
-
Head TypeFixed
-
SeriesC Series
-
SettingAutomatic Reset
-
Indicator TypeAudible Click
-
Specifications MetASME B107.14M
-
Drive Size3/8 in
-
Overall Length15 in
- Calibrated to +/-4% in clockwise direction and +/-6% counter clockwise direction at 20% to 100% of full scale
- Calibration is accomplished by mechanical loading each wrench in a horizontal position and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
- This Proto® torque wrench is made from high grade steel for strength and durability
- Positive locking mechanism to dial and lock in desired torque
- Thin head design to allow access in tight areas
- Calibrated To Plus or Minus 3% In Clockwise Direction And Plus Or Minus 6% In Counter Clockwise Direction
- For strength and durability
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | KP4220735 |
-
UNSPSC27111715
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.14M
Recently Viewed
Proto® J6005C C Micrometer Torque Wrench, 3/8 in Drive, Fixed Head, 16 to 80 ft-lb, 0.5 ft-lb, 15 in OAL
Campbell® T7625314 Rigid Round Eye Quick Snap, 5/8 in, 2-7/8 in OAL, 5/8 in ID Eye, 70 lb Load, Polished
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
RIDGID® 48650 Bolt Die, 1 in Conduit/Pipe, 1-8 UNC Thread, Right Thread, For Use With 500B, 531, 532, 541 and 542 Machine Die Heads, HSS
RIDGID® 48650 Bolt Die, 1 in Conduit/Pipe, 1-8 UNC Thread, Right Thread, For Use With 500B, 531, 532, 541 and 542 Machine Die Heads, HSS
DIXON 200-F-SS Cam and Groove Fitting, 2 in Nominal, Male Adapter x MNPT End Style, 316 Stainless Steel
HCI Preferred Supplier 63965 Cam and Groove Fitting, 2 in Nominal, Male Adapter x MNPT End Style, 316 Stainless Steel
1-1/2" -FEMALE PIPE THREADX1/2" FEMALE PIPE THREAD BLACK REDUCER
Proto® TorquePlus™ J1210MES Combination Wrench, 10 mm Wrench, 12 Points, 15 deg Offset, 3-3/4 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
