Armstrong® 26-043 Regular Length Open End Wrench, 3/8 x 7/16 in Wrench, 15 deg Offset, 5.22 in L, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 26-043 Regular Length Open End Wrench, 3/8 x 7/16 in Wrench, 15 deg Offset, 5.22 in L, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412260434
-
Manufacturer Part Number26-043
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeRegular Length
-
Handle TypeFlat
-
Wrench Opening3/8 x 7/16 in
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.24 in
-
Open End Width0.75 x 0.88 in
-
Overall Length5.22 in
- Two different size openings on opposite ends provides broader coverage than a combination wrench, less wrenches to carry
- Open ends are offset 15 deg for turning a fastener in a 30 deg arc
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 33004789 |
-
UNSPSC27111706
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
Recently Viewed
Armstrong® 26-043 Regular Length Open End Wrench, 3/8 x 7/16 in Wrench, 15 deg Offset, 5.22 in L, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 26-043 Regular Length Open End Wrench, 3/8 x 7/16 in Wrench, 15 deg Offset, 5.22 in L, High Alloy Steel, Polished Chrome, ASME B107.6-1994
4" X 1-1/2" 250# SWIVEL CASTERS-PJCMH415RS64S >
The Crosby G-414 5/8" is a hot-dip galvanized, extra heavy-duty wire rope thimble designed to protect wire rope eyes from wear, crushing, and deformation. Manufactured by The Crosby Group, it is a non-load-bearing rigging component used to maintain the shape of a loop or eye in a wire rope assembly under tension.
Proto® TorquePlus™ J6904M Standard Length Socket, Metric, 1/4 in Square Drive, 4 mm
80-CHAINPULLER Dodge® 098191 Chain Assembly Tool, For Use With 80 to 240 Numbers Chain, 5 in Maximum Jaw Spread
This unique tool was designed to make sizes 35 thru 240 chain installation easy. By hooking the two jaws into each end of the chain and turning the screw (handle) until the two ends almost meet, the connecting link can be inserted and fastened in place. The model 80 uses a T-handle instead of a knob.
6&12-PT MIDGET 11/32&3/8 - ALL66024 >
