Proto Tools 7/8" 12-PT COMBINATION WRENCHES PRO J-1228-ASD
Proto® TorquePlus™ J1228ASD Anti-Slip Design Combination Wrench, 7/8 in Wrench, 12 Points, 15 deg Offset, 12-1/2 in OAL, Alloy Steel, Satin, ASME B107.100
-
BrandProto®
-
UPC662679073947
-
Manufacturer Part NumberJ1228ASD
-
CountryUSA|Canada
-
Finish/CoatingSatin
-
MaterialAlloy Steel
-
Throat Depth1-1/16 in
-
Measurement SystemImperial
-
TypeAnti-Slip Design
-
Handle TypeSlip-Resistant/Straight
-
Head Angle15 deg
-
Wrench Opening7/8 in
-
Wrench TypeSpline
-
Number of Points12
-
Specifications MetASME B107.100
-
Offset Angle15 deg
-
Open End Thickness3/8 in
-
Open End Width1-13/16 in
-
Overall Length12-1/2 in
-
Box End Thickness33/64 in
-
Box End Width1-1/4 in
- Satin finish provides corrosion resistance and a slip resistant grip
- 12 point box end allows for fine indexing, helping to improve speed and access, fits 4, 6 and 12 point fasteners
- Anti-slip design (ASD) open end
- Box ends incorporate the TorquePlus™ system
- Locking groove to help prevent slippage
- Arched surface which spreads the force over a 400% larger contact area to help prolong life
- No ribs or serrations to damage fasteners
- Allows upto 15% more torque to be applied to the fastener
- Reduces risk of fastener rounding
- Provides a better grip on worn, rounded fasteners
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4214410 |
| Berkshire eSupply | KP4214410 |
| Berkshire eSupply | KP4214410 |
| Berkshire eSupply | KP4214410 |
-
UNSPSC27111713
-
Package Description6/BX
-
Standards/ApprovalsASME B107.100
Recently Viewed
Proto® TorquePlus™ J1228ASD Anti-Slip Design Combination Wrench, 7/8 in Wrench, 12 Points, 15 deg Offset, 12-1/2 in OAL, Alloy Steel, Satin, ASME B107.100
1-1/2" -6" X 36" USS B-7 THREADED ROD-NBS983150 >
3/8" X 100' TAPE MEASURE-LUF306576 >
8" X 3" 2000# SWIVEL CASTERS-PJCHD830PS86S>
Proto® J1214SPL Combination Wrench, Imperial, 7/16 in, 12 Points, 15 deg Offset, 6-29/32 in OAL, Alloy Steel, Full Polished, ASME B107.100
Milwaukee® 6880 Double Insulated Corded Electric Nibbler, 12 ga Stainless Steel, 10 ga Steel Cutting, 2-1/2 in Cutting Radius, 1000 spm, 120 V AC/DC, Metal/Nylon Housing, 12-1/4 in OAL
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A 1.65 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6880 is our heaviest nibbler with 10 gauge capacity in steel and 12 gauge into stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
