Armstrong® 25-208 Long Length Open End Combination Wrench, 1/4 in, 12 Points, 15 deg Offset, 5 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-208 Long Length Open End Combination Wrench, 1/4 in, 12 Points, 15 deg Offset, 5 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412252088
-
Manufacturer Part Number25-208
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeLong Length Open End
-
Handle TypeFlat
-
Head Angle15 deg
-
Wrench Opening1/4 in
-
Number of Points12
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.14 in
-
Open End Width0.55 in
-
Overall Length5 in
-
Box End Thickness0.19 in
-
Box End Width0.39 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- The shank to box end transition area is also reinforced to provide greater strength
- Open end has a radius design for greater strength, especially when compared to a hex open end
- Large size stamp on both ends of the wrench and both sides of the wrench for ease in identification
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 22D041 |
| Grainger | 22D041 |
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
-
Catalog
Recently Viewed
Armstrong® 25-208 Long Length Open End Combination Wrench, 1/4 in, 12 Points, 15 deg Offset, 5 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-208 Long Length Open End Combination Wrench, 1/4 in, 12 Points, 15 deg Offset, 5 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Makita® A-96833 ImpactX™ Driver Bit, #3 Phillips® Point, 3-1/2 in OAL, 1/4 in, S2 Steel
ImpactX™ is a line of impact-rated insert bits and fastening accessories built specifically for the demands of the professional contractor. Professionals require commercial duty bits and fastening accessories that can endure the force of high-volume screw driving applications with high torque impact drivers. Standard screwdriving bits are brittle and fit poorly into fasteners and in applications with high torque impact drivers this losing combo quickly leads to broken bits. ImpactX™ hits back with improved fitment and increased performance with high torque impact drivers. Precision machined (not forged) tips ensure full contact fit, while performance-optimized and heat-treated S2 steel provides more flex and more durability than standard, brittle bits.
#2 Wire Bending Phillips Screwdriver
Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches
Bends 10, 12 and 14 AWG wire
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Precision-machined tip for exact fit
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Meets or exceeds applicable ASME / ANSI specifications
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
Dodge® 83538 First Stage Pinion Gear, 78 Diametral Pitch, 34 Teeth, 2-1/2 in Dia Pitch
Dodge® 83538 First Stage Pinion Gear, 78 Diametral Pitch, 34 Teeth, 2-1/2 in Dia Pitch
Bore Size: 1-1/4 inch Housing Type: 2-bolt split housing pillow block Lining: Babbitt lined
