GP® 3927M Standard Length Socket Driver Bit, 3/4 in Hex Drive, 27 mm, 0.79 in L Bit
GP® 3927M Standard Length Socket Driver Bit, 3/4 in Hex Drive, 27 mm, 0.79 in L Bit
-
BrandGP®
-
Manufacturer Part Number3927M
-
CountryUSA
-
MaterialChrome Molybdenum Alloy Steel
-
Measurement SystemMetric
-
TypeStandard Length
-
Impact RatedYes
-
Bit Length0.79 in
-
Bit Size27 mm
-
Bit TypeHex
-
Drive End Width1.73 in
-
Drive Size3/4 in
-
Drive TypeHex
-
Overall Length3.94 in
- Poly bag with barcode
Recently Viewed
GP® 3927M Standard Length Socket Driver Bit, 3/4 in Hex Drive, 27 mm, 0.79 in L Bit
GP® 3927M Standard Length Socket Driver Bit, 3/4 in Hex Drive, 27 mm, 0.79 in L Bit
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
Proto® J47701/8 Standard Length Socket Driver Bit, 1/4 in Drive, 1/8 in, 1 in L Bit, Federal GGG-W-641Ex
Replacement fabric strips when originals wear out for fabric attachment shoe 49-90-0570. Set of two.
GP® 4928F Standard Length Socket Driver Bit, 1 in Hex Drive, 7/8 in, 0.79 in L Bit
GP® 4928F Standard Length Socket Driver Bit, 1 in Hex Drive, 7/8 in, 0.79 in L Bit
Greenlee® 30476 Basket Type Multiple Strength Cable Pulling Grip, 0.5 to 0.74 in Cable, 32 in L Mesh, 1 in Dia Eye, 2000 lb Load, Galvanized Steel
Greenlee® 30476 Basket Type Multiple Strength Cable Pulling Grip, 0.5 to 0.74 in Cable, 32 in L Mesh, 1 in Dia Eye, 2000 lb Load, Galvanized Steel
