Marshalltown® 23D Flexible Drywall Corner Trowel, 4 in L x 5 in W, Stainless Steel Blade, Soft Grip Handle
Marshalltown® 23D Flexible Drywall Corner Trowel, 4 in L x 5 in W, Stainless Steel Blade, DuraSoft®/Straight/Integral Finger Guard Handle
-
BrandMarshalltown®
-
UPC035965053235
-
Manufacturer Part Number23D
-
CountryUSA
-
TypeFlexible
-
Handle TypeSoft Grip
-
AngleSet at 103 deg, Flexes to Form 90 deg Corner
-
Blade Length4 in
-
Blade MaterialStainless Steel
-
Blade Width5 in
- Lightweight tool made from one-piece of flexible stainless steel with aluminum mounting
- Resilient DuraSoft® handle
| Cross-Reference Number |
|---|
| 355243 |
-
UNSPSC27112201
Recently Viewed
Marshalltown® 23D Flexible Drywall Corner Trowel, 4 in L x 5 in W, Stainless Steel Blade, Soft Grip Handle
Marshalltown® 23D Flexible Drywall Corner Trowel, 4 in L x 5 in W, Stainless Steel Blade, DuraSoft®/Straight/Integral Finger Guard Handle
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
40-B-28-F-5/8 28 Tooth Sprockets For #40
28 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B28F5/8 >
5-TON 20' LIFT CHAIN HOIST-JET121726>
35-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-35-F-1-1/2
35 TOOTH SPROCKETS FOR #60 CHAIN
Dichtomatik N70107 O-Ring, 107 Dash Number, 0.206 in ID x 0.412 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
