WISS 175-E-5 Electrician Scissor, 1-3/4 in Length of Cut, 5-1/4 in OAL, Pointed Tip, Drop Forged Solid Steel Blade, Right/Left Hand
Crescent®17500000 Electrician Scissor, 1-3/4 in Length of Cut, 5-1/4 in OAL, Sharp Tip, Drop Forged Solid Steel Blade, Right/Left Hand
-
BrandCrescent®
-
UPC037103580825
-
Manufacturer Part Number17500000
-
CountryUSA
-
FinishNickel Plated
-
Tip TypePointed
-
ColorSilver
-
TypeElectrician
-
Hand TypeRight/Left
-
Handle MaterialSteel
-
Handle TypeAngled
-
Applicable MaterialsWire/String/Paper
-
Cutting Capacity19 ga/23 ga Wire
-
Blade MaterialDrop Forged Solid Steel
-
Blade Size1-3/4 in L
-
Blade TypeSerrated
-
Length of Cut1-3/4 in
-
Overall Depth0.125 in
-
Overall Length5-1/4 in
-
Overall Width3 in
- Serrated along entire bottom blade
- Scraper and file on back edge of blade
- Standard full drop run
- Double stripping notch for 19 ga (0.035) and 23 ga (0.022) wire
- Hot drop-forged solid steel
- Fully nickel-plated
- Packaged in vinyl pouch
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | LA50175E5 |
-
Alternative Part Number175E5
-
UNSPSC27111500
-
Package Description24 CS/PK
-
WarrantyLimited Lifetime
-
Catalog
Recently Viewed
WISS 175-E-5 Electrician Scissor, 1-3/4 in Length of Cut, 5-1/4 in OAL, Pointed Tip, Drop Forged Solid Steel Blade, Right/Left Hand
Crescent®17500000 Electrician Scissor, 1-3/4 in Length of Cut, 5-1/4 in OAL, Sharp Tip, Drop Forged Solid Steel Blade, Right/Left Hand
Milwaukee® 49-57-0038 Replacement Pilot Drill, 1/2 in, 1/2 in D Cutting, High Carbon Steel
Replacement pilot bit for use with arbor model 49-57-0035 which can be used for both steel plate and sheet metal Carbide tipped hole saws. This bit is standard equipment.
Reed 93200 Wheel Pin, For Use With: Rotaryâ„¢ Pipe Cutter
The wheel pin is universal to all REED LCRC and RC cutters. It is used to hold the wheel in place and allows for easy change of wheels, whether from old to new, or from wheels for steel to wheels for cast/ductile iron, which gives these cutters their useful versatility. (Note: the RC36S and RC42S cutters are only for steel.) REED strongly recommends changing all four cutter wheels simultaneously for optimum cutter performance. The 93220 outboard roller is for use with all cutter wheels except the RCX wheel. Each cutter wheel requires two outboard rollers for a total of eight per cutter. The 93222 outboard roller is a specially designed roller for use with the RCX wheel only. When using RCX wheels, it is critical to change the outboard rollers from 93220 and use only the 93222 roller. The RCX wheels are designed to cut thicker-walled pipe, and the 93222 roller has a smaller diameter, which allows the longer profile of the RCX wheel to penetrate steel or stainless pipe wall up to 0.8 inches (20.3 mm). As with all LCRC or RC cutters, a total of eight outboard rollers is required per cutter. To cut only thicker-walled steel or stainless steel pipe, order cutters with the "X" designation (such as LCRC8X), because these come automatically equipped with the RCX wheels and 93222 rollers.
Reed 03666 Cutter Wheel, For Use With Reed MC2 Mini Tubing Cutters, Ridgid 101, 103, 104, 105, 118, 150, 150L, 131, 132, 151, 152, 153 and 205 Tubing Cutters, 0.146 in Blade Exposure, Steel
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Milwaukee® 49-56-8000 Pilot Bit, 1/4 in Arbor, High Speed Steel
Wilton® WL9-86670 Classic™ Heavy Duty F-Clamp, 5-1/2 in D Throat, 20 in Clamping
The Wilton® Classic Series F-Clamps are among the first of their kind. With a timeless design, this series is an industry favorite. Heavy-Duty F-Clamps feature a clamping force of 2660 lbs, a heavy-duty replaceable pad and replaceable parts.
