Proto Tools 10-TON PRESS-N-PULL 2-LEG PULLERS PRO J-4242
Proto® Press-N-Pull™ J4242 2-Leg 2-Way Puller Set, 10 ton, 14 in Max Reach, 11 in Max Spread
-
BrandProto®
-
UPC662679471323
-
Manufacturer Part NumberJ4242
-
CountryUSA
-
Capacity10 ton
-
Max Reach14 in
-
Maximum Spread11 in
-
Type2-Leg 2-Way
-
Screw Size7/16-14 x 3/4
-
Number of Pieces13
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 105860056 |
| Applied Industrial Technologies | 105860056 |
| Applied Industrial Technologies | 105860056 |
-
UNSPSC27111712
-
Catalog
Recently Viewed
Proto® Press-N-Pull™ J4242 2-Leg 2-Way Puller Set, 10 ton, 14 in Max Reach, 11 in Max Spread
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
Milwaukee® 48-22-6625 Compact Measuring Tape With Belt Clip, 25 ft L x 25 mm W Blade, Steel Blade, 1/16 in, 1/8 in, 1/4 in, 1/2 in Graduation
The MILWAUKEE® 25ft Compact Tape Measures deliver up to 12' of reach*. These tapes are equipped with wear resistant nylon blade protection and an impact-resistant 5-point reinforced frame. An integrated stamped steel belt clip allows the tape measure to be easily carried.
Milwaukee® 48-20-5030 Heavy Duty Thin Wall Core Bit, 1-3/4 in Drill - Fraction, 1.75 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
MEDIUM NITRILE GLOVES--B0XOF 100-BST7005M >
Easy On/Off hose connections.
Positive seals.
Quick &: easy assembly.
Maximum operating pressure 300 PSI.

