Nutdrivers
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
Standard length for most applications; full hollow shaft fits over long bolts and studs
Internal flanges provide solid, twist-resistant shaft anchor
Handle end is also color coded for easy identification
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies nut driver and size
Cushion-Grip™ handle allows for greater torque and comfort
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Fits over long bolts and studs; internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Meets or exceeds applicable ASME / ANSI specifications
Made in USA
Handle end color coded for easy identification
Cushion-Grip™ handle for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Standard length for most applications, fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Exclusive hollow shaft design with Rare Earth magnetic tip features unobstructed pass-through, even on long bolts
Hollow shaft facilitates work on bolt applications
Cushion-Grip handle allows for greater torque and comfort
Handle end is color-coded for easy identification
Internal flanges provide solid, twist-resistant shank anchor
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Nut Driver reaches into deep recesses
Fits over long bolts and studs
Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Made in USA
Chrome-plated shaft helps prevent corrosion
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
Nut Driver with powerful nut-holding magnet built into shank
Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Chrome-plated shaft helps prevent corrosion
Made in USA
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
Klein® 32807MAG 7-in-1 Multi-Bit Nutdriver, 1/4 in, 5/16 in, 11/32 in, 3/8 in, 1/2 in, 7/16 in, 9/16 in, Black Cushion Grip Handle
This Klein Screwdriver / Nut Driver is seven sizes in one tool. All sizes allow for easy, one-handed driving. The sizes are interchangeable ensuring you have the size you need when you need it. Color coded shaft ends make it easy to identify the size. Increase your productivity and lighten your load with this multi-nut driver.
This 9 piece insulated nut driver set features an assortment of popular nut driver sizes. Each are individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. The highly durable, black nylon case features a zipper closure, custom-fitted tool pockets plus an extra pocket for storage of papers and other items.
Klein® 630-1/2-INS Nut Driver, 1/2 in, Hollow Shank, Cushion Grip Handle
Recently Viewed
White-Rodgers™ 50A55-3797 Replacement Integrated Furnace Control, 25 V AC, 0.45 A
The 50A55-3797 is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyze, and control the proper operation of the gas burner, inducer, and fan. signals interpreted during continual surveillance of the thermostat and flame sensing element initiate automatic ignition of the burner, sensing of the flame, and system shutoff during normal operation. these controls incorporate system fault analysis for quick gas flow shutoff , coupled with automatic ignition retry upon sensing a fault correction. it is designed as a replacement for the following controls.
Milwaukee® M18™ 2145-20 Compact Site Light, LED Lamp, 18 V DC, Li-Ion Battery
The MILWAUKEE® M18™ RADIUS™ Compact Site Light is the world’s first high output cordless site light and provides light in task, area and overhead applications. The compact LED job site light offers 4,400 lumens of TRUEVIEW™ High Definition Output. The portable LED site light provides enough light to illuminate large work areas and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens and IP54 ingress protection allow it to withstand the toughest job site conditions. The high-quality LEDs never need to be replaced and are backed by a limited lifetime warranty. Milwaukee RADIUS™ Site Lights provide maximum coverage for task, area, or overhead applications with their ability to fill an entire workspace with 360 degrees of light.
F-S RECEPTACLE BOX COVERS-APLFSK1VDRA>
Milwaukee® SHOCKWAVE™ Impact Duty™ 48-89-9248 Impact Step Drill Bit, 1/8 in Dia Min Hole, 1 in Dia Max Hole, 9 Steps, Titanium, 9 Hole Sizes, 1/4 in Shank
Milwaukee’s SHOCKWAVE™ Impact Duty™ step bits are engineered to deliver the most durable and fastest holes in the market. Made in the USA with global materials, these step bits have best-in-class performance in impact drivers and the versatility to be used in drills. The 1/4 in. hex shank with an optimized Shockzone™ provide the industry’s most durable shank, reducing early shank breaks. A titanium aluminum nitride (TiBone) coating helps deliver 5x longer life, while the Rapid Strike™ tip and dual spiral flute produces 2x faster holes.
Heavy-duty No. 8 natural canvas tool bag
Rivet-reinforced for durability
Steel-frame mouth with hinge for rugged use
Stitched and riveted leather handles for comfort and strength
Two retaining straps with buckles provide secure closure
Moisture resistant vinyl bottom with non-scratch feet to protect against wear
Retro-fit bags with shoulder strap kit (Cat. No. 5102S). Kit includes leather strap with pad and snap hooks, rings and fasteners for attaching rings to bags
Carlon® B225R-UPC Old Work Outlet Box, PVC, 25 cu-in Capacity, 2 Gangs, 3-15/16 in L x 3-1/8 in W x 2-3/4 in D
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
