Nutdrivers
KLEIN TOOLS 630-9/16-INS 9/16-Inch Nut Driver 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
KLEIN TOOLS 630-5/8-Ins Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-5/16-INS Insulated 5/16'' Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-5/16 5/16-Inch Nut Driver Cushion-Grip™ 3-Inch Shaft
Standard length for most applications, fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-3/8 3/8-Inch Nut Driver with 3-Inch Hollow Shaft
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-3/163/16-Inch Nut Driver, 3-Inch Hollow Shaft, Cushion-Grip™
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Fits over long bolts and studs; internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Meets or exceeds applicable ASME / ANSI specifications
Made in USA
Handle end color coded for easy identification
Cushion-Grip™ handle for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-3/16-INS Insulated 3/16'' Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-11/32-INS Insulated 11/32'' Nut Driver Hollow
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-11/32 11/32-Inch Nut Driver 3-Inch Cushion-Grip™
Standard length for most applications; full hollow shaft fits over long bolts and studs
Internal flanges provide solid, twist-resistant shaft anchor
Handle end is also color coded for easy identification
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies nut driver and size
Cushion-Grip™ handle allows for greater torque and comfort
KLEIN TOOLS 630-1/4-INS Insulated 1/4'' Nut Driver Hollow Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN TOOLS 630-1/4 1/4-Inch Nut Driver 3-Inch Shaft Cushion-Grip™
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-1/21/2-Inch Nut Driver, 3-Inch Shaft, Cushion-Grip™
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-1/2-INS Insulated 1/2'' Nut Driver Hollow Shank
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
KLEIN 646-7/16 7/16" X 6"-shaft Cushion Grip Nut Driver
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN 646-5/16-INS 5/16-Inch Insulated Nut Driver with 6-Inch Shank
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
Two layers of insulation provide protection against electric shock
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications
Made in USA
Tip-Ident quickly identifies nut driver size
Cushion-Grip™ handles for greater torque and comfort
KLEIN 646-3/8 3/8" X 6" Shaft Cushion
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN 630-7/16-INS Insulated 7/16'' Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
KELIN TOOLS 630-7/16 7/16-Inch Hollow Nut Driver, 3-Inch, Cushion-Grip™
Standard length for most applications, fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
GEARWRENCH® 82752 Nutdriver, 5/16 in, Hollow Shank, Black/Red Cushion Grip Handle
The GEARWRENCH® hollow shaft nutdrivers have a rubber cushion-grip handle for reduced hand fatigue and improved comfort. The hollow shaft is ideal when working with longer bolts or threaded rods. Full polished chrome shafts resist rust and corrosion and easily wipe clean. These nutdrivers come available in SAE and metric sizes in open stock and sets.
66-840 ARMSTRONG TOOLS 13-mm Hollow Shaft Metric Nut Driver, 6-point
13-MM HOLLOW SHAFT METRIC NUT DRIVER, 6-POINT OPENING
66-838 11-mm Hollow Shaft Metric Nut Driver, 6-point
11-MM HOLLOW SHAFT METRIC NUT DRIVER, 6-POINT OPENING-ARS66838 >
66-837 ARMSTRONG TOOLS 6-MM-HEX HAND-HELD NUTDRIVERS 10-mm Hollow Shaft Metric Nut Driver, 6-point
10-MM HOLLOW SHAFT METRIC NUT DRIVER, 6-POINT OPENING
Recently Viewed
Milwaukee® M12™ 48-20-7461 2-Cutter Single Tip Rotary Hammer Drill Bit, 7/16 in Drill Bit, SDS-Plus Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
HYDRAULIC PUNCH DRIVER SETS-GRN7804SB>
Klein® 5227L Light Weight Electrician's Web Tool Belt With Friction Buckle, L, Leather
Klein® 5227L Light Weight Electrician's Web Tool Belt With Friction Buckle, L, Leather
