H K PORTER 0290FCS Lightweight Hand Operated Cutter, 500 kcmil Copper, 750 kcmil Aluminum, 1-3/8 in Communications Cable Cable/Wire, 25-1/2 in OAL, Shear Cut, Forged Alloy Steel Jaw
Face the storm with confidence with Crescent H.K. Porter's line of Fiberglass Cable Cutters. Featuring grips that are specifically designed for multiple cutting positions, ultimately reducing fatigue and enhancing control. H.K. Porter blades are forged and machined in the USA with precision heat treatment which allows for longer blade life. The jaw pivot geometry has been optimized for a lower force to cut over the tool's life. Cut soft materials (31HRC) up to 1/2" or 13mm thick, medium materials (42HRC) up to 7/16" or 11mm thick, and hard materials (48HRC) up to 3/8" or 10mm thick with the 30" fiberglass bolt cutter.
-
BrandCrescent®
-
UPC037103908063
-
Manufacturer Part Number0290FCS
-
CountryUSA|Canada
-
Cable/Wire Size500 kcmil Copper, 750 kcmil Aluminum, 1-3/8 in Communications Cable
-
FinishSteel
-
Material ApplicationAluminum, Copper and Communication Cable
-
ColorYellow
-
TypeLightweight
-
Handle MaterialFiberglass
-
Handle TypeStraight
-
Cut TypeShear
-
InsulatedNo
-
Jaw MaterialForged Alloy Steel
-
Spring ReturnNo
-
Overall Length25-1/2 in
- Grips specifically designed for multiple cutting positions, allowing for full body leverage and one-handed cuts, reducing overall fatigue
- Cuts Blades are forged and machined in the USA with precision heat treatment for longer blade life or aluminum, power and communications cable
- Industrial sized fiberglass handles for increased strength and cutting leverage
- Optimized jaw pivot geometry for lower force to cut over tool life
- Improved locking plate and nylon locking nuts design minimizes bolt loosening and reduces the need for retightening
- Screw adjustment for realignment as needed
- NEVER use any Crescent H.K. Porter cutters on energized circuits, wire, or cable
- Cuts soft material (31HRC) up to 1/2 in or 13mm thick, cuts medium materials (42HRC) up to 7/16 in or 11mm thick, cuts hard materials (48HRC) up to 3/8 in or 10mm thick
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 2H009 |
| MSC | 94222783 |
| Fastenal | 0508155 |
-
UNSPSC23241616
-
Package DescriptionEACH
Recently Viewed
H K PORTER 0290FCS Lightweight Hand Operated Cutter, 500 kcmil Copper, 750 kcmil Aluminum, 1-3/8 in Communications Cable Cable/Wire, 25-1/2 in OAL, Shear Cut, Forged Alloy Steel Jaw
Face the storm with confidence with Crescent H.K. Porter's line of Fiberglass Cable Cutters. Featuring grips that are specifically designed for multiple cutting positions, ultimately reducing fatigue and enhancing control. H.K. Porter blades are forged and machined in the USA with precision heat treatment which allows for longer blade life. The jaw pivot geometry has been optimized for a lower force to cut over the tool's life. Cut soft materials (31HRC) up to 1/2" or 13mm thick, medium materials (42HRC) up to 7/16" or 11mm thick, and hard materials (48HRC) up to 3/8" or 10mm thick with the 30" fiberglass bolt cutter.
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
PIXB104K>
PROJECTOR BULB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA74K>
Crescent® 56384 Fold Up Screwdriver Set, 6 Pieces, Alloy Steel/Duracast® Handle
Crescent® 56384 Fold Up Screwdriver Set, 6 Pieces, Alloy Steel/Duracast® Handle
