Busbar Tool Accessories
KLEIN TOOLS601-6-INS Insulated 3/16'' Cabinet - 6'' Screwdriver
1000V rated for safety.
Two layers of insulation provide protection against electric shock.
Klein insulated tools are individually tested to exceed IEC 60900 and ASTM F1505 standards for insulated tools.
Custom US-made tool steel.
Cushion-Grip™ handle for superior torque and comfort.
Perfect for electrical, telephone and work in recessed holes and other tight spaces.
This item has been discontinued and replaced by the 601-7-INS.
KLEIN TOOLS D-362-11 Pliers, Long-Reach Needle Nose Pliers, 45 Degree Bent Nose, 11-Inch
45 degree bent nose to reach around obstructions..
Long handles and nose allow for greater access to confined, hard to reach areas.
Long reach design provides greater holding power at the tip with minimal effort.
Hot-riveted joint for smooth action and no handle wobble.
Knurled jaws for sure wrapping and looping.
Plastic-dipped handles for comfort and ease of identification.
Custom, US-made tool steel.
KLEIN TOOLS D-360-11 Pliers, Long-Reach Needle Nose Pliers, Straight Nose, 11-Inch
11" STRAIGHT NOSE LONG NOSE PLIER-KLED36011 >
KLEIN TOOLS D-338-5-1/2-C Curved Long Needle-Nose Pliers - Extra Slim
5" LONG NOSE PLIER-
KLEIN TOOLS D-335-5-1/2-C Long-Nose Pliers/ Extra-Slim Needle-Nose/ 5-1/2 inch
Long, narrow nose and slim hinge for extremely close quarter work. • Finely knurled jaws grip thin wire without damaging it. • Spring-loaded for self-opening action • Curved handles provide greater tool control.
KLEIN TOOLS D-327-5-1/2-C 5-9/16" Pliers
5-9/16" LONGNOSE SLIM SMALL JAW PLIER
KLEIN TOOLS D-318-5-1/2-C Pliers, Needle-Nose Pliers, 5-Inch
Pliers designed for accurate work in hard-to-reach areas
Knurled jaws for sure wrapping and looping
Spring-loaded for self-opening action
Curved handles provide greater tool control
Forged in the USA with custom, US-made tool steel for maximum durability
Hot riveted joint for smooth action and no wobble handle
KLEIN TOOLS D-301-7 7-1/8" Standard Long-nose Pliers
STANDARD LONG-NOSE PLIERS, STEEL, 7 3/16 IN
KLEIN TOOLS BD-284 1/4-Inch Keystone Screwdriver 4-Inch Square Shank
Screwdriver has oversized handle that is 35-percent larger than comparable screwdriver handles and delivers up to 50-Percent extra power to perform tough jobs with minimum effort
Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably
Chrome-plated shaft helps prevent corrosion
Internal flanges provide solid, twist-resistant shaft anchor
Made in USA
Nickel-chrome, precision-forged and polished blades with black tips
Meets or exceeds applicable ASME / ANSI specifications
KLEIN TOOLS 666-INS Insulated #2 Square-Recess-Tip Screwdriver
1000V rated for safety
Two layers of insulation provide protection against electric shock
Klein insulated tools are individually tested to exceed IEC 60900 and ASTM F1505 standards for insulated tools
Cushion-Grip™ handle for greater torque and comfort
Custom US-made tool steel
This item has been discontinued and replaced with the 662-7-INS
KLEIN TOOLS 621-8 8" Coated 3/16-Inch Cabinet Tip Screwdriver, 8-Inch
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 621-6 Coated 3/16-Inch Cabinet Tip Screwdriver, 6-Inch
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 621-10 Coated 3/16-Inch Cabinet Tip Screwdriver, 10-Inch
Plastic coated for circuit protection only. NOT INSULATED.
Special plastic coating resists cutting, cracking, and chipping.
Thin coating permits use in confined areas.
Cushion-Grip™ handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion resistance.
Internal flanges inside handle provide solid, twist-resistant blade anchor.
Special heat-treated shafts.
Precision-machined tip for exact fit.
Meets or exceeds applicable ASME / ANSI specifications.
Tip-Ident® quickly identifies the screwdriver type and tip orientation.
KLEIN TOOLS 620-8 3/8-Inch Cabinet Screwdriver, Coated, 8-Inch Round Shank
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 620-6 5/16-Inch Cabinet Screwdriver, Coated, 6-Inch Round Shank
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 607-4 3/32-Inch Cabinet Mini Screwdriver, 4-Inch Round Shank
Precision formed tip provides an exact fit for small screw applications
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Made in USA
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 603-6 #3 Phillips Screwdriver, 6-Inch Round Shank
Precision-machined tip provides accurate fit and torque without slippage
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Meets or exceeds applicable ASME / ANSI specifications
KLEIN TOOLS 603-3-INS Insulated #1 Phillips - 3'' Screwdriver
1000V rated for safety.
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools.
Cushion-Grip™ handles for greater torque and comfort.
Custom US-made steel.
This has been discontinued and replaced with Cat. No. 633-4-INS.
KLEIN TOOLS 603-3-B#1 Wire Bending Phillips Screwdriverstyle
Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches.
Cushion-Grip™ handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion resistance.
Internal flanges inside handle provide solid, twist-resistant blade anchor.
Special heat-treated shafts.
Precision-machined tip for exact fit.
Tip-Ident® quickly identifies the screwdriver type and tip orientation.
Meets or exceeds applicable ASME / ANSI specifications.
KLEIN TOOLS 602-6-INS Screwdriver, Insulated; 5/16 in. Slotted Tip; 10-15/16 in. Long
5/16" X 6" INSULATED SCREWDRIVER
Recently Viewed
/4" Drive 10 mm Hex Impact Bit Socket (9910M) by Grey Pneumatic®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost.
BUNDLE
MAIN PRODUCT
$94.99
ADDONS
$25.97
Total Bundle Price
$151.21
$120.96
Save: $30.25 (20% Off)
Add bundle to bag
Description
1" Drive 58 mm 6-Point Deep Impact Socket (4058MD) by Grey Pneumatic®. Made from the highest-grade material utilizing state-of-the-art manufacturing processes and equipment, this product will help you handle all your tasks easier and quicker. It delivers the perfect balance of strength and stiffness required for any of your high impact jobs.
