RIDGID® 35170 Geared Ratchet Tube Bender, 0 to 180 deg Bend, Cast Aluminum
RIDGID® 35170 Geared Ratchet Tube Bender, 0 to 180 deg Bend, Cast Aluminum
-
BrandRIDGID®
-
UPC095691351708
-
Manufacturer Part Number35170
-
CountryUSA
-
MaterialCast Aluminum
-
Handle TypeLong/Non-cushioned
-
Nominal Capacity5/8 in
-
Bend Angle0 to 180 deg
-
Bend Radius3 in
-
Overall Length22 in
- High-geared mechanical ratios bend heavy-wall steel tube (up to 1/8 in wall thickness), stainless steel tube (up to 3/32 in wall thickness) and hard copper water tube
- Benders produce uniform bends up to 180 deg with no need to anneal tubing or use special temper grade tubing
- Reduce bending effort to a minimum
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1VTT6 |
-
Alternative Part Number358
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyFull Lifetime
-
Warranty Information
Recently Viewed
RIDGID® 35170 Geared Ratchet Tube Bender, 0 to 180 deg Bend, Cast Aluminum
RIDGID® 35170 Geared Ratchet Tube Bender, 0 to 180 deg Bend, Cast Aluminum
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Silicon carbide general purpose wheel for stone, concrete, cast iron, ductile iron, masonry, materials, non-ferrous metals, brass, bronze, plastic, etc. Fast rate of cut. Good wheel life.
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Remke Tuff-Seal™ RSR-213 Straight Cord Grip Connector, 3/4 in Trade, 0.688 to 0.812 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Remke Tuff-Seal™ RSR-212 Form Size 3 Straight Cord Grip Connector With Locknut, O-Ring, 3/4 in Trade, 3, 4 Conductors, 5/8 to 3/4 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-212 Form Size 3 Straight Cord Grip Connector With Locknut, O-Ring, 3/4 in Trade, 3, 4 Conductors, 5/8 to 3/4 in Cable Openings, Aluminum, Nickel Plated
