F-101 Ice Scraper With Metal Blade
ICE SCRAPER WITH METAL BLADE-PRIF101 >
Recently Viewed
ICE SCRAPER WITH METAL BLADE-PRIF101 >
Dichtomatik N70440 O-Ring, 440 Dash Number, 6.725 in ID x 7.275 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
26-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-26-F1-7/16
26 TOOTH SPROCKETS FOR #60 CHAIN
1/4" X 4" STANDARD TIP ROUND SHANK SCREWDRIVER-ARS66501 >
Porter-Cable® 14446 Offset Profile Mounting Plate, For Use With 9444 Profile Sander Kit
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
