TRANSFER PUMPS
2" 7-HP GAS ENGINE WATER TRANSFER PUMP-VALWP207CMR>
SD-602 115-volt Ac Pump That Delivers Up To 13 Gpm. Designed For Tank Or Barrel
115-VOLT AC PUMP THAT DELIVERS UP TO 13 GPM. DESIGNED FOR TANK OR BARREL MOUNTING-TUTSD602 >
1" AUTOMATIC DIESEL FUEL NOZZLE-PRIN3G >
1" AUTOMATIC DIESEL FUEL NOZZLE-TUTN100DAU10 >
TRANSFER PUMP SWITCH LEVER KITS-TUTKIT700SW>
700-F-6673 REPAIR KITS-TUTKIT120NB>
5.5-HP 2" CHEMICAL/WATER PUMP - WSCIH55GCP2>
1" MANUAL DIESEL FUEL NOZZLES-TUTFRHMN100S>
3/4" MANUAL DIESEL FUEL NOZZLES-TUTFRHMN075S>
1" X 12' FUEL TRANSFER HOSE-TUTFRH10012 >
3/4" X 20' FUEL TRANSFER HOSE-TUTFRH07520 >
115-VOLT 20-GPM TRANSFER PUMPS-TUTFR700>
115-VOLT FLUID TRANSFER PUMPS-TUTFR610C>
12-VOLT DC DIAPHRAGM PUMP - TUTFR410B>
12-VOLT TUTHILL FUEL/TRANSFER PUMP-TUTFR1210C>
FH-3412-SW 3/4" X 12' Fuel Hose That Dispenses Diesel Fuel, Gasoline, Grease, Kerosene And Petroleum Oils. The Fill-rite Hose Is A Blend Of Nit Rile And Pvc External
3/4" X 12' FUEL HOSE THAT DISPENSES DIESEL FUEL, GASOLINE, GREASE, KEROSENE AND PETROLEUM OILS. THE FILL-RITE HOSE IS A BLEND OF NIT RILE AND PVC EXTERNAL MATERIALS-TUTFH3412SW >
40-GPM 10-MICRON PARTICLE FILTER-TUTF4010PM0 >
3/4"-FEMALE PIPE THREAD AUTOMATIC GAS AND FUEL NOZZLE-TUTF3144 >
REPLACEMENT FILTER FOR 1200KTF7018 TOOTHUTF1810PM0 >
901-1.5 1-1/2" 6-40 Gal Per Minute Flow Meter. This Pump Should Be Used For Short Periods Of Time--not Over 30 Minutes-tut9011.
1-1/2" 6-40 GAL PER MINUTE FLOW METER. THIS PUMP SHOULD BE USED FOR SHORT PERIODS OF TIME--NOT OVER 30 MINUTES-TUT9011.5 >
901 4-wheel Fuel Meter With A 1" Inch Outlet. Designed For Transfer Pumps With A Flow Of 6-40
4-WHEEL FUEL METER WITH A 1" INCH OUTLET. DESIGNED FOR TRANSFER PUMPS WITH A FLOW OF 6-40 GPM-TUT901 >
3/4" 5-20 GPM FUEL METER WITH A LARGE EASY TO READ DISPLAY-TUT807CMK >
A-901 METER KNOBS-TUT800G8870>
800-C 3 Wheel Mechanical 3/4" Meter Has A Large Easy To Read Display. Flow Ports Can Be Positioned Vertically Or Horizontally. The Pump Is Designed For Transfer Pumps With A Flow Rate Of 5-20
3 WHEEL MECHANICAL 3/4" METER HAS A LARGE EASY TO READ DISPLAY. FLOW PORTS CAN BE POSITIONED VERTICALLY OR HORIZONTALLY. THE PUMP IS DESIGNED FOR TRANSFER PUMPS WITH A FLOW RATE OF 5-20 GPM-TUT800C >
Recently Viewed
10-PC 6-PT 1/4"-DR DEEP SOCKET SET-ARS15255>
APPLETON 4SD1 4" SQUARE BOX, WELDED, 2-1/8" DEPTH, 1/2,3/4 AND 1" KNOCKOUTS, STEEL
4 INCH SQUARE BOX, WELDED, 2-1/8" DEPTH, SIDE KNOCKOUTS: (8) 1", BOTTOM KNOCKOUTS: (3) 1/2", 30.300 CUBIC INCHES, STEEL
-APL4SD1 >
1-1/16" 12-PT 1/2"-DR DEEP SOCKET-ARS12334A>
1" 60-DEG 3-FL CARBIDE COUNTERSINK-MCT56168>
Crescent Wiss® has taken the Aviation Snip to the next level with the advanced MetalMaster® Aviation Snips. The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss MetalMaster® will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional Aviation Snips. They are available in left/straight cut, right/straight cut, and straight cut.
