1-H-102 11" X 21" 2000# Topwind
11" X 21" 2000# TOPWIND JACK-RAM1H102 >
Recently Viewed
11" X 21" 2000# TOPWIND JACK-RAM1H102 >
Morse® 116329 MHSA Advanced Hole Saw With Arbor, 2 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHSA32C (116329), 2" (51mm) diameter, arbored, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per card. To optimize performance consider using Morse CUTLUBE (121408).
TRAILER JACK-JWH582875>
Morse® 131841 MHSTK Hole Saw, 5-1/4 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 5/8 to 18 Arbor
Morse® 131841 MHSTK Hole Saw, 5-1/4 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 5/8 to 18 Arbor
Permatex® 82194 Ultra Grey® Low Odor Non-Flammable Non-Toxic Rigid High Torque Gasket Maker, 3.5 oz Container Carded Tube Container
Permatex® ultra Gray® gasket maker is a single component, room temperature vulcanizing gasketing compound designed to provide reliable formed-in-place gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to perform under the higher load conditions of engines with closely spaced bolt patterns (typically non-US designed) and maintains outstanding oil, water-glycol resistance.
Morse® 177801 MHS Advanced Hole Saw, 5 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHS80 (177801), 5" (127mm) diameter, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per box. Seperate arbor required, use MA35PSN (139052) or MA45PSN (139069). To optimize performance consider using Morse CUTLUBE (121408).
