1-H-110 RAM JACKS
TRAILER JACKS-RAM1H110>
Recently Viewed
TRAILER JACKS-RAM1H110>
HCI Preferred Supplier 80512 Pressure Gauge, 0 to 30 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial
HCI Preferred Supplier 80512 Pressure Gauge, 0 to 30 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial
Wilton® WL9-63185 Pedestal Base, For Use With 1755 and 1765 Tradesman Vise, 10-1/2 x 8-1/2 in Top Platform, 33-1/2 in H, Steel
Wilton® WL9-63185 Pedestal Base, For Use With 1755 and 1765 Tradesman Vise, 10-1/2 x 8-1/2 in Top Platform, 33-1/2 in H, Steel
Proto® J46420 Hex Key, Cushion T-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
Proto® J46420 Hex Key, Cushion Grip/T-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
Morse® Real McCoy® TA28 Hole Saw, 1-3/4 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Dodge® 023159 215 Non-Expansion Type E-Xtra Triple Lip Top Angle Take-Up Tapered Roller Bearing, 2-15/16 in Dia Bore, 8-1/2 in L x 4-1/2 in W x 8.31 in H, 11120 lb Dynamic/61200 lb Static Load
Type E-Xtra, Type K, double-interlock, TAF and EXL mounted bearings are all general purpose high capacity tapered roller bearings capable of handling any combination of radial and thrust load within the capacity of the bearing. All of these bearings are mounted to the shaft by means of set screw collars having 65 deg set screw spacing for optimum clamping force. The Type E-Xtra, double-interlock, TAF and EXL mounted bearings have locking collars at each end of their extended inner races. Type K has a single locking collar. The tapered roller bearings for these mounted bearings all have case carburized inner races (cones), outer races (cups) and rollers. Bearings are preassembled, prelubricated and factory adjusted. They are normally equipped with land riding contact type seals with a metal deflector guard.
