Linn 10FS32 Rough Bore Spur Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 32 Teeth, 3.2 in Dia Pitch, 3/4 to 1-5/8 in Dia Bore, Steel
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
-
BrandLinn
-
Manufacturer Part Number10FS32
-
CountryUSA
-
Face Width1 in
-
Pitch Diameter3.2 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeRough Bore
-
Hub Diameter2-3/4 in
-
Diametral Pitch10
-
Number of Teeth32
-
Bore Diameter3/4 to 1-5/8 in
-
Overall Length1.87 in
-
UNSPSC31171707
Recently Viewed
Linn 10FS32 Rough Bore Spur Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 32 Teeth, 3.2 in Dia Pitch, 3/4 to 1-5/8 in Dia Bore, Steel
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
Remke Tuff-Seal™ RSR-313 Straight Cord Grip Connector, 1 in Trade, 0.688 to 0.812 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Lincoln® 815 Hydraulic Air Coupler, 1-1/16 in, 2-1/2 in L
3-1/4" WALL DOOR STOP PATCH-N-GUARD-JWH250694>
Powers offers high quality powder loads, produced by the largest manufacturer in the United States, with unsurpassed quality and reliability. Specific load types are designed for each unique powder actuated tool. They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools.
Leviton® L7503 Straight Single Weave Wide Range Wire Mesh Strain Relief Grip, 1/2 in Trade, 0.4 to 0.54 in Cable Openings, Steel, Galvanized
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
