Linn 10FS20 Rough Bore Spur Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 20 Teeth, 2 in Dia Pitch, 0.75 to 0.937 in Dia Bore, Steel
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
-
BrandLinn
-
Manufacturer Part Number10FS20
-
CountryUSA
-
Face Width1 in
-
Pitch Diameter2 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeRough Bore
-
Hub Diameter1.71 in
-
Diametral Pitch10
-
Number of Teeth20
-
Bore Diameter0.75 to 0.937 in
-
Overall Length1.62 in
-
UNSPSC31171707
Recently Viewed
Linn 10FS20 Rough Bore Spur Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 20 Teeth, 2 in Dia Pitch, 0.75 to 0.937 in Dia Bore, Steel
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
TAPERED ROLLER BEARING CONE -NTN25581 >
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
APA® AllGard Protective Apparel C181272XL C18127 Coverall with Attached Hood and Elastic Ankle, 2XL, White, Micro-Porous Film Over Spunbonded Polypropylene
APA® AllGard Protective Apparel C181272XL C18127 Coverall with Attached Hood and Elastic Ankle, 2XL, White, Micro-Porous Film Over Spunbonded Polypropylene
Atkore International 8025010 Rigid Non-Metallic Schedule 80 Electrical Conduit, 2-1/2 in Belled End Trade, 2.25 in Dia Inside x 2.875 in Dia Outside, 10 ft L, PVC
Atkore provides the full range of PVC electrical conduit in diameters 1/2" through 8".
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
