Browning 60-TOOTH 20-PITCH SPUR GEARS BRW NS-S-20-60 X 1
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289211968
-
Manufacturer Part Number1210756
-
CountryUSA
-
Face Width3/8 in
-
Pitch Diameter3 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore
-
Hub Diameter1-13/16 in
-
Hub Projection1/2 in
-
Diametral Pitch20
-
Number of Teeth60
-
Outside Diameter3.1 in
-
Bore Diameter3/8 in
-
Overall Length7/8 in
- Browning® split taper bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Helical gears are quieter than spur gears and give maximum smoothness on parallel shafts
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
-
Alternative Part NumberNSS2060
-
UNSPSC31171707
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
#14 X 2-1/2" Flat Head Phillips Sheet Metal Screw
CONNECTORS-RED12706>
FOR HEAVY-DUTY TO FINE FINISH WORK. TAMPICO FIBER PROVIDES DENSITY AND FLEXIBILITY. HARDWOOD BLOCK
-JWH772266 >
MORSE® 44934 4611C Center Cutting Regular Length Roughing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, TiCN Coated
MORSE® 44934 4611C Center Cutting Regular Length Roughing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, TiCN Coated
Sealmaster 1-15/16"-ID 2-B TRB PILLOW BLOCKS SEA RPB-115-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
