Browning 60-TOOTH 16-PITCH SPUR GEARS BRW NS-S-16-60
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289252480
-
Manufacturer Part Number1211218
-
CountryUSA
-
Face Width1/2 in
-
Pitch Diameter3-3/4 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
Gear Ratio1:1
-
TypeMinimum Plain Bore Type 2
-
Hub Diameter2 in
-
Hub Projection5/8 in
-
Diametral Pitch16
-
Number of Teeth60
-
Outside Diameter3.87 in
-
Bore Diameter1/2 to 1-1/4 in
-
Overall Length1-1/8 in
- Browning® Split-Taper® bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
- Without hardened teeth
- Browning Gears are rated in accordance with AGMA standards
- When you think Special Gears - Think Browning
-
Alternative Part NumberNSS1660
-
UNSPSC31171707
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Warranty Information
-
Catalog
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
BBI 462777 Fully Threaded Hex Bolt, M24x3, 75 mm L Under Head, 10.9 Grade, Alloy Steel, Plain
BBI 462777 Fully Threaded Hex Bolt, M24x3, 75 mm L Under Head, 10.9 Grade, Alloy Steel, Plain
8" -DIA 8" -WIDE CONVEYOR PULLEY-BRWD8C8X115/16 >
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
HCI Preferred Supplier 32338 Swivel Hose Adapter, 3/4 in Nominal, Barb x 37 deg Female JIC Flare, Brass
HCI Preferred Supplier 32338 Swivel Hose Adapter, 3/4 in Nominal, Barb x 37 deg Female JIC Flare, Brass
GEARWRENCH® 85086 Micrometer Torque Wrench, 3/8 in Drive, 5 to 75 ft-lb, Flexible/Ratcheting/Teardrop Head, 0.5 ft-lb Graduation, 17.7 in OAL, ASME B107.300
The GEARWRENCH® family of torque wrenches and torque products offer the latest innovations in torque measurement. The line includes micrometer, tire shop, beam, and electronic torque wrenches and torque multipliers. The micrometer wrenches come available in fixed head and flex head. The fixed head line offers wrenches in 1/4 to 3/4 in drives. The flex head wrenches are available in 3/8 in and 1/2 in drive sizes. The tire shop wrenches feature a rugged tire tread rubber cover on the head intended specifically for checking wheel lug nuts and are available in 3/8 in and 1/2 in drive sizes. The electronic torque wrenches ensure a precise fastener torque level and are available in either 3/8 in and 1/2 in drives. The GEARWRENCH® line of torque products allow you to complete any job where accurate torque is required.
