Browning® 1225705 Minimum Plain Bore Type C1 Change Gear, 8 Diametral Pitch, 14.5 deg Pressure Angle, 1-1/4 in W Face, 92 Teeth, 11-1/2 in Dia Pitch, 1-3/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289252305
-
Manufacturer Part Number1225705
-
CountryUSA
-
Face Width1-1/4 in
-
Pitch Diameter11-1/2 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore Type C1
-
Diametral Pitch8
-
Number of Teeth92
-
Outside Diameter11-3/4 in
-
Bore Diameter1-3/8 in
-
Overall Length1-1/4 in
- Browning Split Taper Bushed Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- Helical Gears are quieter than spur gears and give maximum smoothness on parallel shafts
-
Alternative Part NumberNCG892
-
UNSPSC31171700
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® 1225705 Minimum Plain Bore Type C1 Change Gear, 8 Diametral Pitch, 14.5 deg Pressure Angle, 1-1/4 in W Face, 92 Teeth, 11-1/2 in Dia Pitch, 1-3/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
PIX BX-136 IS A COGGED, CLASSICAL V-BELT 139" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32 IN THICKNESS
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
-PIXBX136 >
36"-W X 24"-D X 78"-H PARCHMENT TAN WARDROBE CABINET - HLW835W24PT >
8-MM-PITCHX2000-MM TIMING BELT-JAS20008M25 >
GEARWRENCH® 85086 Micrometer Torque Wrench, 3/8 in Drive, 5 to 75 ft-lb, Flexible/Ratcheting/Teardrop Head, 0.5 ft-lb Graduation, 17.7 in OAL, ASME B107.300
The GEARWRENCH® family of torque wrenches and torque products offer the latest innovations in torque measurement. The line includes micrometer, tire shop, beam, and electronic torque wrenches and torque multipliers. The micrometer wrenches come available in fixed head and flex head. The fixed head line offers wrenches in 1/4 to 3/4 in drives. The flex head wrenches are available in 3/8 in and 1/2 in drive sizes. The tire shop wrenches feature a rugged tire tread rubber cover on the head intended specifically for checking wheel lug nuts and are available in 3/8 in and 1/2 in drive sizes. The electronic torque wrenches ensure a precise fastener torque level and are available in either 3/8 in and 1/2 in drives. The GEARWRENCH® line of torque products allow you to complete any job where accurate torque is required.
SPECIAL LAWNMOWER BALL BEARING-IBIZ9504AB >
