Browning 45-TOOTH 16-PITCH CHANGE GEARS BRW N-CG-16-45
Browning® is one of the most comprehensive lines of off-the shelf gears in the industry, including spur, miter and bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 dp and 14-1/2 deg pressure angle from 48 to 3 dp all designed to increase output, reduce costs and avoid specials.
-
BrandBrowning®
-
UPC662289219179
-
Manufacturer Part Number1222678
-
CountryUSA
-
Face Width1/2 in
-
Pitch Diameter2.813 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore Type C1
-
Diametral Pitch16
-
Number of Teeth45
-
Outside Diameter2.93 in
-
Bore Diameter3/4 in
-
Overall Length1/2 in
- Thousands of shaft-ready finished bore and bushing types eliminate rework costs, assure true-running precision at all times
- More stock sizes made of steel and weldability plus greater strength, at cast iron prices
- Extra tooth depth and larger radii provide stronger teeth, a deeper lubrication reservoir and more clearance
- Many odd tooth sizes
- Custom gear capabilities up to 60 in Dia and 17 in face
-
Alternative Part NumberNCG1645
-
UNSPSC31171700
-
Standards/ApprovalsAGMA Standard
-
Catalog
Recently Viewed
Browning® is one of the most comprehensive lines of off-the shelf gears in the industry, including spur, miter and bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 dp and 14-1/2 deg pressure angle from 48 to 3 dp all designed to increase output, reduce costs and avoid specials.
1-GAL DIESEL FUEL CONDITIONER-SIL6B >
Dichtomatik 75122141 O-Ring, 17 mm ID x 22 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom H-2.5 X 17
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1.969" X 3.149" X .393 NMS5 RG SEALS. SMALL BORE /HDDF/HDL
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MORSE® 43268 1895 Double End Non-Center Cutting Regular Length End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
MORSE® 43268 1895 Double End Non-Center Cutting Regular Length End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
