Browning 1:1 PARALLEL SHAFT GEAR REDUCERS BRW 12-HB-1-SN-10
Browning® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. Browning® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.
-
BrandBrowning®
-
UPC662289240470
-
Manufacturer Part Number1251578
-
CountryUSA
-
Lubrication TypeOil
-
Centre Distance2-13/16 in
-
MaterialCast Iron
-
Torque Rating36.013 in-lb Input/28.82 in-lb Output
-
Gear Ratio1:1
-
TypeStraight Type SN
-
Mounting TypeSurface
-
Horsepower1 hp
-
Input Maximum Speed1750 rpm
-
Input Size1-1/4 in Dia x 5.263 in L
-
Input TypeShaft
-
Dimensions9-3/4 in L x 11.251 in W x 5-5/8 in H
-
Keyway Size1/4 x 1/8 in
-
Output Maximum Speed1750 rpm
-
Output Size1-1/4 in Dia x 2-1/2 in L
-
Efficiency80 %
-
Output TypeShaft
- Rugged cast iron housings, line bored for precise gear and bearing alignment
- Carburized alloy steel gears manufactured to AGMA standards for long life and quiet operation
- Double-lip contact oil seals ride on hardened plunge ground shafts for leak free operation
- Reducer size 12
-
Alternative Part Number12HB1-SN10
-
UNSPSC26111542
-
Standards/ApprovalsAGMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Browning 1:1 PARALLEL SHAFT GEAR REDUCERS BRW 12-HB-1-SN-10
Browning® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. Browning® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.
Dodge® 083332 First Stage Pinion Gear, 78 Diametral Pitch, 77 Teeth, 1-1/2 in Dia Pitch
Dodge® 083332 First Stage Pinion Gear, 78 Diametral Pitch, 77 Teeth, 1-1/2 in Dia Pitch
TAPERED ROLLER BEARING CONE-KOYLM104949 >
METRIC TAPERED ROLLER BEARING SET-NTN32008X >
OIL SEALS-1.378" X 1.969" X .315"-CHI13946>
