TXT926AT Dodge® Torque-Arm™ II 904002 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 20 hp, 15:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
-
BrandDodge®
-
UPC782475611508
-
Manufacturer Part Number904002
-
CountryUSA
-
Lubrication TypeOil
-
FinishGray
-
MaterialCast Iron
-
Gear Ratio15:1
-
TypeHeavy Duty Single and Double Reduction
-
Mounting TypeShaft
-
Horsepower20 hp
-
Input Maximum Speed1800 rpm
-
Input Size1.4375 in Dia x 5.02 in L
-
Input TypeSolid Shaft
-
Dimensions16.61 in L x 8.94 in W x 20.14 in H
-
Output Size2-11/16 in
-
Output TypeTapered Hollow Bore
- Unparalleled torque ratings
- Industry leading backstop design
- Patented sealing system
- Modular steel motor mount system
- Patented twin tapered bushing system
- Advanced sealing system
- 1800 rpm input/120 rpm output
- Case size: 4
- Size: TA4207H
-
Alternative Part NumberTA4207H15
-
UNSPSC26111536
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|ATEX|BSA|CEMA|EASA|MHI|MPTA|NEMA|NSSSGA|PTDA|RoHS Compliant|SME|SWE|TUV Certified
-
WarrantyLimited
-
Warranty Information
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
TXT926AT Dodge® Torque-Arm™ II 904002 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 20 hp, 15:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
40-W DECORATIVE BULB--CARD OF 2-JWH510986 >
HCI Preferred Supplier 44254LF Imperial Pipe Tee, 3/4 in Nominal, MNPT End Style, Bronze
HCI Preferred Supplier 44254LF Imperial Pipe Tee, 3/4 in Nominal, MNPT End Style, Bronze
Diversitech 5-457007 Union, 3/4 in Nominal, Slip End Style, SCH 40/STD, PVC, Domestic
3/4 inch PVC Plastic Union (Slip/Socket x Slip/Socket). These fittings are designed to meet most residential, industrial irrigation/agricultural needs. They offer rigidity with resistance to chemicals and corrosion. A smooth interior wall provides free flow and helps prevent scaling. Highly versatile, lightweight and easy to install. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion.
PAIR SIZE-9 STEEL TOE RUBBER BOOTS-BOO995479 >
MasterDrive R1-1.11/16 R1 Series Double Split Tapered Bushing, 1.68 in Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 2-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
