Littelfuse® MAX70 MAXI™ 299 Slow Blow Time Delay Automotive Fuse, 70 A, 32 V DC, 1 kA Interrupt
MAXI™ fuses are primarily used for under hood applications and are produced with a high temperature polymer and silver plated blades. They replace the commonly used fusible wire or fusible link to protect a high current segment or system of the wiring harness. Features Littelfuse designed industry standard color-coding to indicate amp rating.
-
BrandLittelfuse®
-
UPC079458021042
-
Manufacturer Part NumberMAX70
-
CountryUSA
-
Terminal TypeBlade
-
MaterialThermoplastic
-
Rejection/Non-RejectionNon-Rejection
-
ColorTan
-
TypeSlow Blow Time Delay
-
Mounting TypeHolder
-
Voltage Rating32 V DC
-
Amperage Rating70 A
-
Width8.9 mm
-
SeriesMAXI™ 299
-
Indicating/Non-IndicatingIndicating
-
Interrupt Rating1 kA
-
Length29.2 mm
- 360000 sec at 100%, 60 to 1800 sec at 135%, 2-to 60 sec at 200%, 0.2 to 7 sec at 350%, 0.04 to 1 sec at 600% opening time
-
Alternative Part Number0MAX070.X|8558911
-
UNSPSC39121622
-
IDEA Index ID8558911
-
Package DescriptionEACH
-
Standards/ApprovalsRoHS Compliant|SAE J1888|PROP65: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
Littelfuse® MAX70 MAXI™ 299 Slow Blow Time Delay Automotive Fuse, 70 A, 32 V DC, 1 kA Interrupt
MAXI™ fuses are primarily used for under hood applications and are produced with a high temperature polymer and silver plated blades. They replace the commonly used fusible wire or fusible link to protect a high current segment or system of the wiring harness. Features Littelfuse designed industry standard color-coding to indicate amp rating.
As Markal® most versatile and economic marker, the original B® Paintstik® solid paint marker combines the durability of paint in the convenience of a crayon. The real paint formula has superior marking performance on oily, icy, wet, dry or cold surfaces and is weather and UV-resistant. This Paintstik® works on rough, rusty, smooth or dirty surfaces.
Drillco 73A156C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 7/8 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 7/8 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
DRILLCO 7L132ADC 7000L Carbide Burr, Radius End, Taper Head, 1/2 in Dia Head, 1-1/8 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
ECONOMY RATCHET HEADGEAR-AMS27910 >
Milwaukee® M18™ 48-59-1810 Bare Tool Vehicle Charger, For Use With M12™ and M18™ Battery, Li-Ion Battery, Li-Ion Battery
Charge on the go. The M18™ & M12™ vehicle charger allows users to charge battery packs on the go from the DC outlet of any vehicle. The charger provides full system compatibility and accepts all M18™ and M12™ batteries. Featuring REDLINK™ Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack. As an added level of communication, the charger has protective electronics that automatically shut down the charger to prevent excessive discharge of the vehicle battery.
