Littelfuse® POWR-GARD® LKN125 LKN Fuse Link, 250 VAC, 125 A, For Use With RLN Series Class H Single Element Renewable/Time Delay Fuse
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
-
BrandLittelfuse®
-
UPC079458320848
-
Manufacturer Part NumberLKN125
-
CountryUSA
-
Rated Breaking Capacity10 kA
-
Frequency Rating50/60 Hz
-
Mounting TypeBlade
-
Voltage Rating250 V AC
-
Amperage Rating125 A
-
SeriesLKN
-
Dimensions7-1/8 in L x 1-1/2 in W
-
Suitable For Use WithRLN Series Class H Single Element Renewable/Time Delay Fuse
- Electrically connected to the end blade
-
UNSPSC39121609
-
Standards/ApprovalsUL Listed|CSA/CE Certified|RoHS Compliant
Recently Viewed
Littelfuse® POWR-GARD® LKN125 LKN Fuse Link, 250 VAC, 125 A, For Use With RLN Series Class H Single Element Renewable/Time Delay Fuse
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
United Abrasives-SAITIndustrial 03512 Small Cup Brush, 3-1/2 in Dia Brush, 5/8-11 Arbor Hole, 0.02 in Dia Filament/Wire, Knot, 302 Stainless Steel Fill
ITM C63NF0008 Plug Tap, 8-36 NF Thread, H3 Thread Limit
1-9/16" -ID 1615-STYLE TAPER-LOCK BUSHING-BRW1615X19/16 >
3 GROOVE BANDED 3-V-500 V-BELT-JAS3R3V500 >
Dichtomatik 75127009 O-Ring, 35 mm ID x 40 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 2.5-mm x 35-mmt
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
