Milton® s-986 900 Dual Head Straight Foot Chuck Service Gauge, 10 to 160 psi Pressure, Brass Body, 13 in OAL, 2 lb Resolution
Milton® s-986 900 Dual Head Straight Foot Chuck Service Gauge, 10 to 160 psi Pressure, Brass Body, 13 in OAL, 2 lb Resolution
-
BrandMilton®
-
UPC030937009869
-
Manufacturer Part Numbers-986
-
CountryUSA
-
Pressure Rating10 to 160 psi
-
Resolution2 lb
-
TypeDual Head Straight Foot Chuck
-
Series900
-
Body MaterialBrass
-
Overall Length13 in
- Provide accurate, long life, trouble-free performance
- Nickel plated brass tubular body and 4-sided nylon indicator bars
- Calibrated in three ranges before leaving factory
-
UNSPSC25172500
-
WarrantyLimited
Recently Viewed
Milton® s-986 900 Dual Head Straight Foot Chuck Service Gauge, 10 to 160 psi Pressure, Brass Body, 13 in OAL, 2 lb Resolution
Milton® s-986 900 Dual Head Straight Foot Chuck Service Gauge, 10 to 160 psi Pressure, Brass Body, 13 in OAL, 2 lb Resolution
HCI Preferred Supplier 300002 Breather Vent, 1/4 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300002 Breather Vent, 1/4 in, 40 micron Filter, Brass Body/Sintered Bronze Element
Coilhose® PE064-500K Standard Pneumatic Tubing, 1/4 in ID x 3/8 in OD x 500 ft L, 0.62 in THK Wall, Polyethylene, Domestic
Coilhose® PE064-500K Standard Pneumatic Tubing, 1/4 in ID x 3/8 in OD x 500 ft L, 0.62 in THK Wall, Polyethylene, Domestic
Arlington Zero to 90™ NMLT7590 Non-Metallic Liquidtight Conduit Connector, 3/4 in Trade, 90 deg, Plastic
Arlington Zero to 90™ NMLT7590 Non-Metallic Liquidtight Conduit Connector, 3/4 in Trade, 90 deg, Plastic
Anvil® 0310023809 FIG 1102 Standard 45 deg Pipe Elbow, 1 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
7/32" -5/8" SC-04 HOSE CLAMPS-MURGS4 >

