Baldwin Filters® PT117 Bypass Lube Element Filter With Bail Handle, Element Filter, 6 in OD, 14-1/2 in L
Baldwin Filters® PT117 Bypass Lube Element Filter With Bail Handle, Element Filter, 6 in OD, 14-1/2 in L
-
BrandBaldwin Filters®
-
UPC791440001565
-
Manufacturer Part NumberPT117
-
CountryUSA
-
MaterialPaper
-
TypeBypass
-
Outside Diameter6 in
-
Length14-1/2 in
- Two attached end seals
-
UNSPSC40161515
-
Standards/ApprovalsPROP65: These products can expose you to chemicals, including Diisononyl Phthalate, Carbon black extracts, Nickel, 1, 3 Butadiene, Ethylene Oxide, Epichlorohydrin, which are known to the State of California to cause cancer and Bisphenol, Ethylene Glycol, Ethylene Oxide, 1, 3 Butadiene, Epichlorohydrin, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Recently Viewed
Baldwin Filters® PT117 Bypass Lube Element Filter With Bail Handle, Element Filter, 6 in OD, 14-1/2 in L
Baldwin Filters® PT117 Bypass Lube Element Filter With Bail Handle, Element Filter, 6 in OD, 14-1/2 in L
Oatey® Rain-R-Shine® 30893 Low VOC Medium Body PVC Cement, 16 oz Container, Blue
Oatey® PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber. This blue, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Lincoln® 5852 Hydraulic Coupler, 1/8 in FNPT Fitting End, 6000 psi Max Pressure, For Use With All Hydraulic Type Grease Fitting
Lincoln® 5852 Hydraulic Coupler, 1/8 in FNPT Fitting End, 6000 psi Max Pressure, For Use With All Hydraulic Type Grease Fitting
Oatey® PVC Heavy Duty Medium Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its thick formula fills gaps in large diameter pipe and loose-fitting joints and is easy to apply with included in-lid dauber. This clear, heavy duty, medium set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings with interference fit up to 18 in. diameter for non-pressure and 12 in. diameter for pressure pipes. Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey® 31133 All Weather Low VOC Medium Body PVC Cement, 32 oz Container, Clear
Oatey® PVC All Weather Medium Bodied Fast Set Clear Cement is recommended for potable water, drain, waste and vent applications. It is formulated to perform in all weather conditions from -15°F to 110°F and applies easily with included in-lid dauber. This clear, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
