Leviton® L7702 Straight Deluxe Cord Sealing Single/Double Weave Wire Mesh Strain Relief Grip, 3/8 in Trade, 0.25 to 0.312 in Cable Openings, Aluminum/Stainless Steel, Anodized
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
-
BrandLeviton®
-
UPC078477973714
-
Manufacturer Part NumberL7702
-
CountryUSA
-
Cable Openings0.25 to 0.312 in
-
FinishAnodized
-
MaterialAluminum/Stainless Steel
-
Trade Size3/8 in
-
TypeStraight Deluxe Cord Sealing Single/Double Weave
-
Connection TypeMNPT
- Deluxe cord grips are woven of stainless steel mesh with an anodized aluminum body for corrosion resistance
- They are offered in single/double weave construction to help absorb direct pulling, resist flexing and binding and eliminate strain
- They are recommended for indoor or outdoor use where moisture may be present in the wiring of pendant stations, processing equipment, hand tools and extension cord sets
-
Alternative Part Number7358759
-
UNSPSC39131607
-
IDEA Index ID7358759
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty2 Years Limited
-
Specification Sheet
-
Specification Sheet
Recently Viewed
Leviton® L7702 Straight Deluxe Cord Sealing Single/Double Weave Wire Mesh Strain Relief Grip, 3/8 in Trade, 0.25 to 0.312 in Cable Openings, Aluminum/Stainless Steel, Anodized
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Crescent® RTZ210CG Tongue and Groove Pliers, ASME, 2.1 in Nominal, 1.25 L x 1.4 W x 0.38 T in Jaw Alloy Steel Jaw Straight Jaw, 10 in OAL
The Crescent Z2 line of pliers is Crescent's most advanced range of professional pliers. The Z2 line of pliers offer the professional the best grip and cut day in and day out. They are forged from alloy steel and precision machined for long life and durability. The Z2 pliers offer unique features such as the K9 Jaws which provide a strong grip, even when on a 35° angle and a high leverage joint design which provides up to 35% greater cutting power.
2-1/2" -MALE PIPE THREADXCLOSE GALVANIZED NIPPLE-FIT21/2XCLGN >
3734XL 3734 High Performance Cut Resistant Gloves, XL, Fiberglass/HPPE, Knit Wrist Cuff, Resists: Abrasion, Cut and Snag, ANSI Cut-Resistance Level: A4
3734XL 3734 High Performance Cut Resistant Gloves, XL, Fiberglass/HPPE, Knit Wrist Cuff, Resists: Abrasion, Cut and Snag, ANSI Cut-Resistance Level: A4
Browning® 1004647 Type D Solid Multiple Sheave, 1/2 to 2-5/8 in QD® Bore, 7.35 in OD, 3 Grooves, 6.8 in (A)/7.3 in (B) Dia Pitch, 2-1/2 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
