LEVITON SINGLE LOOP ELECTRICAL WIRE GRIPS LEV L-9504
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
-
BrandLeviton®
-
UPC078477970683
-
Manufacturer Part NumberL9504
-
CountryUSA
-
Cable Size1 to 1.24 in
-
FinishTin Coated
-
MaterialBronze
-
Mesh Length12 in
-
TypeClosed Mesh Single U-Eye Single Weave Standard Duty
-
Breaking Strength1680 lb
- Closed mesh support grips are used when the end of the cable is accessible
- Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
- Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
-
Alternative Part Number7357108
-
UNSPSC39131607
-
IDEA Index ID7357108
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified
-
Warranty2 Years Limited
-
Specification Sheet
-
Specification Sheet
Recently Viewed
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Remke Tuff-Seal™ 2201-013R Single Eye Single Weave Closed Mesh Standard Duty Wire Mesh Cable Grip, 530 lb Breaking Strength, 0.5 to 0.62 in Cable, Bronze, TiN Coated
Tuff-Seal™ Support Grips are designed to hold the weight of cable that is vertical or sloping. Support grips serve an important function; electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in power failure. Tuff-Seal™ Support Grips are woven with non-magnetic, tinned bronze wire that absorbs strain and flexing while resisting cable pull-out, flexing and vibration. These grips are available in a variety of eye styles and cable ranges, can be used either indoors or outdoors and will support cable, metal rods and tubing with loads up to 600 lb.
Endurance blades offer faster cutting and extra long life for contractors. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
MORSE® 44586 4582 Center Cutting Double End Regular Length End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
NIBCO 78-256-01 2-Piece Shut-Off Ball Valve, 1/2 in Nominal, FNPT End Style, Bronze Body, RPTFE Softgoods, Domestic
Apollo™ 7825601 78-248 2-Piece Shut-Off Ball Valve, 1/2 in Nominal, FNPT End Style, Bronze Body, RPTFE Softgoods, Domestic
3/8" GAS CUTOFF BALL VALVE-NIBR6023/8 >
