LEVITON LOCKING BALE ELECTRIC SUPPORT GRIP LEV L-7993
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
-
BrandLeviton®
-
UPC078477973493
-
Manufacturer Part NumberL7993
-
CountryUSA
-
Cable Size0.53 to 0.73 in
-
FinishTin Coated
-
MaterialBronze
-
TypeBus Drop Duty Closed Mesh Locking Bale Single U-Eye Single Weave
-
Breaking Strength1100 lb
-
Mesh Length6.5 in
- Used as cable support
- They relieve any direct tension from the critical connection and absorb vibration and flexing
- Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables
-
Alternative Part Number7358609
-
UNSPSC39131607
-
IDEA Index ID7358609
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified
-
Warranty2 Years Limited
-
Specification Sheet
-
Catalog
Recently Viewed
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Dodge® 023009 115 Type E-Xtra Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.88 to 7.13 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.88 in OAL 4-1/2 in OAH
Dodge® 023009 115 Type E-Xtra Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.88 to 7.13 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.88 in OAL x 4-1/2 in OAH
Dichtomatik N70109 O-Ring, 109 Dash Number, 0.299 in ID x 0.505 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dodge® 023003 107 Type E-Xtra Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 5.63 to 5.88 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 7.38 in OAL x 3-3/4 in OAH
Dodge® 023003 107 Type E-Xtra Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 5.63 to 5.88 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 7.38 in OAL x 3-3/4 in OAH
IDEAL® 23-002M Brush Seater and Commutator Cleaner, 4-3/4 in L x 1/2 in W x 1/4 in H, Medium Grade
