Flat Washers
PFC 392160 Flat Washer, 3/8 in, 3/8 in ID x 1-1/2 in OD, 0.05 in THK, Stainless Steel
PFC 392160 Flat Washer, 3/8 in, 3/8 in ID x 1-1/2 in OD, 0.05 in THK, Stainless Steel
PFC 392080 Flat Washer, 1/4 in, 1/4 in ID x 1-1/2 in OD, 0.05 in THK, Stainless Steel
PFC 392080 Flat Washer, 1/4 in, 1/4 in ID x 1-1/2 in OD, 0.05 in THK, Stainless Steel
PFC 392040 Flat Washer, 1/4 in, 1/4 in ID x 1 in OD, 0.05 in THK, Stainless Steel
PFC 392040 Flat Washer, 1/4 in, 1/4 in ID x 1 in OD, 0.05 in THK, Stainless Steel
PFC 391180 Commercial Standard Flat Washer, 7/16 in, 7/16 in ID x 1-1/8 in OD, 0.062 in THK, Stainless Steel
PFC 391180 Commercial Standard Flat Washer, 7/16 in, 7/16 in ID x 1-1/8 in OD, 0.062 in THK, Stainless Steel
Hillman™ 290018 Fender Washer, 1/4 in, 9/32 in ID x 1-1/2 in OD, Steel
Hillman™ 270067 Wide Pattern USS Flat Washer, 1/2 in, 9/16 in ID x 1-3/8 in OD, 1/8 in THK, Steel
Hillman™ 270067 Wide Pattern USS Flat Washer, 1/2 in, 9/16 in ID x 1-3/8 in OD, 1/8 in THK, Steel
Hillman™ 270055 Wide Pattern USS Flat Washer, 1/4 in, 5/16 in ID x 3/4 in OD, Steel
Hillman™ 270055 Wide Pattern USS Flat Washer, 1/4 in, 5/16 in ID x 3/4 in OD, Steel
BBI 398180 Flat Washer, 3/4 in, 1-3/4 in OD, 0.105 in THK, Stainless Steel
BBI 398160 Flat Washer, 5/8 in, 1-1/2 in OD, 0.078 in THK, Stainless Steel
BBI 398120 Flat Washer, 1/2 in, 1-1/4 in OD, 0.078 in THK, Stainless Steel
BBI 398040 Flat Washer, 1/4 in, 5/8 in OD, 0.05 in THK, Stainless Steel
BBI 394360 Washer
BBI 394220 Flat Washer, 5/16 in, 11/16 in OD, 0.065 in THK, Stainless Steel
BBI 392180 Fender Flat Washer, 3/8 in ID x 1-1/4 in OD, 0.05 in THK, 304 Stainless Steel
BBI 392180 Fender Flat Washer, 3/8 in ID x 1-1/4 in OD, 0.05 in THK, 304 Stainless Steel
BBI 392100 Fender Washer, 5/16 in, 0.355 to 0.34 in ID x 1-1/2 in OD, 0.05 in THK, Stainless Steel
BBI 392100 Fender Washer, 5/16 in, 0.355 to 0.34 in ID x 1-1/2 in OD, 0.05 in THK, Stainless Steel
BBI 392060 Fender Flat Washer, 1/4 in ID x 1-1/4 in OD, 0.05 in Thk, 304 Stainless Steel
BBI 392060 Fender Flat Washer, 1/4 in ID x 1-1/4 in OD, 0.05 in Thk, 304 Stainless Steel
BBI 390300 Flat Washer, 1 in ID x 2 in OD, 0.105 in THK, 304 Stainless Steel
BBI 390280 Flat Washer, 7/8 in ID x 2 in OD, 0.105 in THK, 304 Stainless Steel
BBI 390260 Flat Washer, 3/4 in ID x 1-3/4 in OD, 0.105 in THK, 304 Stainless Steel
BBI 390260 Flat Washer, 3/4 in ID x 1-3/4 in OD, 0.105 in THK, 304 Stainless Steel
BBI 390220 Flat Washer, 5/8 in, 5/8 in ID x 1-1/2 in OD, 0.078 in THK, Stainless Steel
BBI 390220 Flat Washer, 5/8 in, 5/8 in ID x 1-1/2 in OD, 0.078 in THK, Stainless Steel
BBI 390200 Flat Washer, 1/2 in ID x 1-1/4 in OD, 0.062 in THK, 304 Stainless Steel
BBI 390200 Flat Washer, 1/2 in ID x 1-1/4 in OD, 0.062 in THK, 304 Stainless Steel
BBI 390120 USS Flat Washer, 3/8 in, 0.416 to 0.399 in ID x 7/8 in OD, 0.062 in THK, Stainless Steel
BBI 390120 USS Flat Washer, 3/8 in, 0.416 to 0.399 in ID x 7/8 in OD, 0.062 in THK, Stainless Steel
BBI 390080 Flat Washer, 5/16 in ID x 3/4 in OD, 0.05 in Thk, 304 Stainless Steel
BBI 390040 Flat Washer, 1/4 in, 1/4 in ID x 5/8 in OD, 0.045 in THK, Stainless Steel
BBI 390040 Flat Washer, 1/4 in, 1/4 in ID x 5/8 in OD, 0.045 in THK, Stainless Steel
Recently Viewed
MCR Safety 93840L Hero™ 93840 Lightweight Gloves, L, Uncoated Coating, Kevlar®/Spandex® Fiber/Stainless Steel, Knit Wrist Cuff, Resists: Abrasion, Cut and Heat, ANSI Cut-Resistance Level: A6, Ambidextrous Hand
MCR Safety 93840L Hero™ 93840 Lightweight Gloves, L, Uncoated Coating, Kevlar®/Spandex® Fiber/Stainless Steel, Knit Wrist Cuff, Resists: Abrasion, Cut and Heat, ANSI Cut-Resistance Level: A6, Ambidextrous Hand
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP3150-14MGT-40 9232 Synchronous Belt, 225 Teeth, 14 mm Pitch, 3150 mm OAL, 40 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Gates® Power Transmission PowerGrip® HTD® 1575-5M-15 Synchronous Belt, 15 mm W, 1575 mm OAL, 5 mm Pitch, 315 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
