Heritage™ BP-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, MB Spring Wire, Zinc Clear
Heritage™ BP-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, MB Spring Wire, Zinc Clear
-
BrandHeritage™
-
Manufacturer Part NumberBP-214
-
CountryUSA
-
FinishZinc Clear
-
MaterialMB Spring Wire
-
Fits Shaft Size3/8 to 3/4 in
-
TypeImperial
-
Diameter0.093 in
-
Length2-1/2 in
- Bridge pins are simple and extremely versatile wire forms used as locking devices
- They are reusable and cost effective
- Commonly used on clevis pins and shafts
-
UNSPSC31163204
-
Package Description100/PK
-
Standards/ApprovalsRoHS Compliant|PROP65: This product can potentially expose you to chemicals including lead, nickel and chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Recently Viewed
Heritage™ BP-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, MB Spring Wire, Zinc Clear
Heritage™ BP-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, MB Spring Wire, Zinc Clear
3" X 12" TIE-ROD HYD/CYLINDERS>
Porter-Cable® C2002 Oil Free Electric Air Compressor, 3.5 scfm at 40 psi, 0.8 hp, 150 psi, Pancake 6 gal Tank
Our 150 psi 6-Gallon Oil-Free Pancake Compressor is constructed with a pancake style tank for stability, with a water drain valve and tough rubber feet. The high-pressure design optimizes air tool performance, delivering 2.6 SCFM at 90 psi for quick recovery time. The oil-free pump provides maintenance-free performance. Transporting is easy with the integrated cord wrap.
#24 4-PLY COTTON BLEND MOP HEAD - DQB12693 >
UP TO 2" HOSE CUTTER-DXNLHC95 >
Browning® 1073592 Type E Q-D® Bushing, 3-3/8 in Dia Bore, 3.834 in Dia Barrel, 6 in Dia Flange, 2.64 in OAL, Steel
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
