01134 1/2" Diameterx2" Dowel
1/2" DIAMETERX2" DOWEL PIN-HOL01134 >
Recently Viewed
1/2" DIAMETERX2" DOWEL PIN-HOL01134 >
Apolloâ„¢ 701012741 70-100 2-Piece In-Line Ball Valve, 1/4 in Nominal, FNPT End Style, Bronze Body, Standard Port, PTFE Softgoods, Domestic
The Apolloâ„¢ 70 Series is the most widely used general purpose bronze ball valve on the market today. The 70-100 model is a 2-piece standard port ball valve featuring female NPT connections. Cast and machined in Apolloâ„¢'s South Carolina manufacturing plants, these valves provide trusted performance and a wide range of options.
Keeney 42-16WU Extension Tube, 1-1/4 in OD x 16 in L, Slip Joint Connection, Plastic, White
Keeney 42-16WU Extension Tube, 1-1/4 in OD x 16 in L, Slip Joint Connection, Plastic, White
MORSE® 11470 1330 General Purpose Jobber Length Drill Bit, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. The BMU bearings are commonly referred to as thrust bearings. These bearings have a 40 deg contact angle to accept heavy axial loads. The bearings have Universally Flush Ground rings to facilitate mounting in multiple bearing sets. The inner and outer rings have identical widths. These bearings can be mounted as DB, DF and DT pairs or can be combined into triplex and quadraplex sets. When two bearings are mounted together, a clearance or preload may be obtained without the use of shims or spacers. This bearing has a machined brass cage and is not available with seals or shields. These bearings are most commonly used in vertical pump and motor applications.
Bando Duraflex GL® 4L820 Light Duty High Speed Drive V-Belt, 4L Section, 1/2 in W Top, 82 in L Outside, 0.31 in THK, Neoprene
Duraflex GL® V-belts are specifically designed for shorter center distance, high-speed fractional horsepower drives. Common applications include HVAC equipment and appliances.
