FINISHING NAILS
FINISH DO-IT-BEST/HWI PRODUCTS
FINISHING NAILS THESE ARE SOLD BY THE POUND-JWHFINISH >
Recently Viewed
1/4 -MALE PIPE THREADX3 SCHEDULE 80 BLACK NIPPLE
1 -MALE PIPE THREADX5 SCHEDULE 80 BLACK NIPPLE
RIDGID® 31010 Heavy Duty Straight Pipe Wrench, 1-1/2 in Pipe, 10 in OAL, Serrated Jaw, Cast Iron Handle
RIDGID® pipe and tubing tools are the foundation of our heritage and brand promise to deliver the most innovative tools in the industry.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Proto® TorquePlus™ J1227MASD Anti-Slip Design Combination Wrench, Metric, 27 mm, 12 Points, 15 deg Offset, 15 in OAL, Alloy Steel, Satin, ASME B107.100
